Gas Equipment
Indotama Niaga Teknik Distributor Valve - PT Indotama Teknik sells various types of Gas Equipment from popular brands.
Share :
Geca Gas Filter GFD DN125 to DN200
Description
Geca Gas Filter GFD DN125 to DN200 designed in accordance with the provisions of DIN.3386 standards can be used for all the types of natural gas, LPG or not corrosive gases. These filters are widely used for protection of control devices, pressure regulators, meters and on systems that requiring an high degree of filtration. All the filter covers are filled with connections for test point both at the filter inlet and outlet.
Type
GFD125 GFD125-SP GFD125-TPIO GFD150 GFD150-SP GFD150-TPIO GFD200
Fitur
-
Giuliani Anello Air Gas Ratio Control Valve GAVR 20
Description
Indotama Niaga Teknik as trusted air gas ratio control valve distributor in Surabaya offers products from Giuliani Anello brand. The product is Giuliani Anello Air Gas Ratio Control Valve GAVR 20. This product effectively keeps a constant gas or air pressure proportion and to control the gas pressure in system. This product can meet the need of industrial and manufacture.
Type
GAVR 20
Fitur
-
Dungs Gas Regulator FRS 515
Description
Dungs Gas Regulator FRS 515. This regulator type has an adjustable setpoint spring that can adjust the output pressure based on how it's adjusted and the installation position. The function of a gas pressure regulator is to stop the flows of gas or liquids when the pressure reaches a define level.
Type
Dungs Gas Regulator FRS 515
Fitur
-
Staflux 185 High Medium Pressure Gas Regulator
Description
PT Indotana Niaga Teknik as distributor Gas Pressure regulator in indonesia offer product from brand pietro fiorentini , that is Staflux 185 High Medium Pressure Gas Regulator. To meet the need industrial and manufacture
Type
Staflux 185 High Medium Pressure Gas Regulator
Fitur
Accuracy class: up to 5 Available size DN: 1″, 2″, 3″ Closing pressure class SG: up to 10 Design pressure: up to 100 bar Design temperature: from -15 °C to +60 °C Flanging: class 300 and 600 RF or RTJ according to ASME B16.5 Outlet pressure range of Wd: from 1 to 75 bar Range of inlet pressure bpu: from 2 to 85 bar
asx 176 high medium gas pressure regulator
Description
As distributor gas pressure regulator in indonesia, PT Indotama Niaga Teknik offer product from brand pietro fiorentini that is , asx 176 high medium gas pressure regulator. To meet the need industrial and manufacture
Type
Asx 176 High Medium Gas Pressure Regulator
Fitur
Accuracy class: up to 1 Available size DN: 1″, 2″, 3″, 4″, 6″ Closing pressure class SG: up to 2.5 Design pressure: up to 102 bar Design temperature: from -20 °C to +60 °C Flanging: class 300, 600 RF or RTJ according to ASME B16.5 Minimum working differential pressure: 0.5 bar Outlet pressure range of Wd: from 0.3 to 74 bar, depending on the installed pilot Range of inlet pressure bpu: from 0.8 to 100 bar
Honneywell Gas Pressure Regulator MK2 DN 50 PN 16
Description
As distributor gas pressure regulator in indonesia , PT Indotama Niaga Teknik offer product from brand honeywell namely Honneywell Gas Pressure Regulator MK2 ,to meet the need industrial and manufacture
Type
Honneywell Gas Pressure Regulator MK2 DN 50 PN 16
Fitur
• Completely independent operation of regulator and safety cut-off valve. • Diaphragm casing can be rotated through 360º at intervals of 45º to assist servicing and installation in confined spaces. • Both regulator casing/valve head and safety cut-off valve can be removed from the body as cartridges, ensuring straightforward maintenance without removing the body from the pipeline. • Wide operational pressure range. • Internally or Externally impulsed (ICL/ECL).
Apperflux 851 gas pressure regulator
Description
PT indotama niaga teknik as distributor gas pressure regulator in indonesia offer product from brand pietro fiorentini namely Apperflux 851 gas pressure regulator, to meet the need industrial and manufacture
Type
Apperflux 851 gas pressure regulator
Fitur
Accuracy class: up to 5 Available size DN: 1″, 2″, 3″, 4″, 6″, 8″, 10″ Closing pressure class SG: up to 5 Design pressure: up to 102 bar Design temperature: from -20 °C to +60 °C (higher or lower temperatures on demand) Flanging: class 150, 300, 600 RF or RTJ according to ASME B16.5 or PN 16, 25, 40 according to ISO 7005 Minimum working differential pressure: 0.5 bar, recommended > 2 bar Outlet pressure range of Wd: from 0.8 to 74 bar, depending on the installed pilot Range of inlet pressure bpu: from 1.3 to 85 bar Where can you use it:
Apperflux 101 gas pressure regulator
Description
indotama niaga teknik as distributor gas pressure regulator in indonesia offer product from brand pietro fiorentini namely Apperflux 101 gas pressure regulator, to meet the need industrial and manufacture
Type
Apperflux 101 gas pressure regulator pilot operated
Fitur
Accuracy class: up to 1 Available size DN: 2″, 3″, 4″ Closing pressure class SG: up to 2.5 Design pressure: up to 85 bar Design temperature: from -10 °C to +60 °C (higher or lower temperatures on demand) Flanging: class 300 and 600 RF or RTJ according to ASME B16.5 Minimum working differential pressure: 1 bar, recommended > 2 bar Outlet pressure range of Wd: from 0.8 to 74 bar Range of inlet pressure bpu: from 1.8 to 85 bar
Dival 500 Gas Pressure Regulator
Description
PT Indotama Niaga Teknik distributor pietro fiorentini in indonesia offer product namely Dival 500 Gas Pressure Regulator, to meet the need industrial and manufactur gas pressure regulator
Type
Dival 500 Gas Pressure Regulator
Fitur
Accuracy class: up to 10 Available size DN: 1″ x 1″, 1″ x 1″ 1/2 Closing pressure class SG: up to 10 Design pressure: up to 10 bar for BP, up to 20 bar for MP and TR Design temperature: from -20 °C to +60 °C Minimum working differential pressure: 0.1 bar Outlet pressure range of Wd: from 13 to 100 mbar for BP, from 100 to 300 mbar for MP, from 300 to 2500 mbar for TR Range of inlet pressure bpu: from 0.5 to 10 bar for BP, from 0.5 to 20 bar for MP and TR
Dival 160 AP Gas Pressure Regulator
Description
As Distributor pietro fiorentini in indonesia. PT Indotama Teknik offer product namely Dival 160 AP Gas Pressure Regulator to meet the need industrial and manufacture
Type
Dival 160 AP Gas Pressure Regulator
Fitur
Accuracy class: up to 5 Available size DN: 1″ Closing pressure class SG: up to 10 Design pressure: 85 bar Design temperature: from -10 °C to +60 °C Flanging: class 300 and 600 RF or RTJ according to ASME B16.5 Outlet pressure range of Wd: from 0.85 to 4.5 bar Range of inlet pressure bpu: from 1.4 to 85 bar
Dungs Gas filter DN 40 to DN 200
Description
Dungs Gas filter DN 40 to DN 200. As a Dungs distributor in Indonesia, Indotama Niaga Teknik, offers products from brand Dungs. Dungs Gas Filter DN 40 to DN 200 can meet the need industrial and manufacture.
Type
Dungs Gas filter DN 40 Dungs Gas filter DN 40 Dungs Gas filter DN 50 Dungs Gas filter DN 65 Dungs Gas filter DN 80 Dungs Gas filter DN 100 Dungs Gas filter DN 125 Dungs Gas filter DN 150 Dungs Gas filter DN 200
Fitur
-
Siemens Gas valve Actuator SKP55
Description
As distributor gas valve actuator siemens in indonesia. PT Indotama Niaga Teknik offer product from brand siemens like Siemens Gas valve Actuator SKP55, to meet the need industrial and manufacture. Please contact our sales to get best price about this product
Type
Siemens Gas valve Actuator SKP55
Fitur
• UL listed, FM approved, CSA certified, IRI approval, and ISO 9001 certified. European, Australian and Japanese approved versions available. • Proof of Closure with Over Travel (POC) option. • Optional NEMA 4 protection. • Visual position indication. • "Power on" indication light. • Quick connect wiring terminals. • Optional adjustable auxiliary switch. • Modular design with 360° actuator rotation for easy field wiring and installation. •Low (10 VA typical), power consumption.
Dungs Pressure regulator for DMV
Description
-Distributor Dungs Pressure regulator, Pressure regulator - .The FRI/6 balancing type pressure regulator combines a pressure regulator and a 50 micron gas filter in one housing. Various combinations are possible using the FRI/6 with the most of the DMV shutoff valves for a compact modular system
Type
FRI 705/6 -FRI 707/6 FRI 710/6 -FRI 712/6
Fitur
-
Dungs Ratio Regulator and Zero Governor
Description
The FRG ratio regulator/zero governor has an adjustable setpoint spring and non adjustable counterspring. - Distributor dungs, distributor gas regulator valve -
Type
FRG 705/6 FRG 707/6 FRG 710/6 FRG 712/6 FRG 715/6 FRG 720/6 FRG 725/6
Fitur
-
Dungs Single stage safety solenoid valves
Description
Distributor dungs - Distributor solenoid valve - .The DUNGS safety solenoid valve MV/4, MVD, MVD/5, MVDLE/5 is a single-stage automatic shut-off valve as per EN 161 for gas burners and gas appliance.
Type
MV/4, MV/5 Single-stage solenoid valve, normally when closed, fast opening, fast closing. MVD/5 Single-stage solenoid valve, normally when closed, fast opening, fast closing, manual limitation of flowing gas volume by adjusting main volume. MVDLE/5 One-stage solenoid valve, normally when closed, slow opening, fast closing. Opening time adjustment with fast stroke range. Main volume adjustment.
Fitur
-
Italpump Gas Filters
Description
Italpump Gas Filters serves to prevent the passage of dust or dirt particles carried by the gas, protect regulatory devices and for safety. This gas filter has a large filtering component, can be removed for inspection and can be washed/cleaned. We have stocks product of Italpump Gas Filters with the following types.
Type
Gas Filter Italpump type IF Gas Filter Italpump type IFR0 Gas Filter Italpump type IFR1-2 Gas Filter Italpump type IFR3-5
Fitur
EC certified according to EN 126
In conformity with the 2009/142/EC Directive (Gas Directive)
In conformity with the 97/23/EC Directive (PED Directive)
In conformity with the 94/9/EC Directive (ATEX Directive)
Italpump Gas Pressure Regulators
Description
Italpump Gas Pressure Regulators is a tool for adjusting the pressure of gas and air outlets using a regulation screw as a pressure regulating device. This tool is equipped with several safety devices, a compact design, and is reliable and suitable for use in household and industrial installations.
Type
Italpump Gas Regulator type IR0
Italpump Gas Regulator type IR1-2
Italpump Gas Regulator type IR3-5
Italpump Gas Regulator type IR5 32-100
Italpump Gas Regulator type IRZ
Fitur
EC certifi ed according to EN 88-2
In conformity with the 2009/142/EC Directive (Gas Directive)
In conformity with the 94/9/EC Directive (ATEX Directive)
In conformity with the 97/23/EC Directive (PED Directive)
Italpump Solenoid Valves
Description
Italpump Solenoid Valves is a valve that is controlled by an AC or DC electric current through the coil. The principle of function of this solenoid valve is very simple and very safe. Equipped with adjustable flow regulator and slow opening kit.
Type
Solenoid Valve Italpump type IE Solenoid Valve Italpump type IEL1-3-6 Solenoid Valve Italpump type IEL03 Solenoid Valve Italpump type IENA
Fitur
EC certifi ed according to EN 161
In conformity with the 2009/142/EC Directive (Gas Directive)
In conformity with the 94/9/EC Directive (ATEX Directive)
In conformity with the 2004/108/EC Directive (Electromagnetic Compatibility)
In conformity with the 2006/95/EC Directive (Low Voltage)
6 bar versions in conformity with the 97/23/EC Directive (PED Directive)
Anello Gas Pressure Regulators
Description
Anello Gas Pressure Regulators is a tool for adjusting the gas outlet pressure suitable for the installation of automatic gas burner systems and for industrial distribution systems. It has a safety diaphragm that is incorporated to ensure that in the event of a breakdown of the operating diaphragm, no gas leakage is possible.
Type
Gas Pressure Regulator Anello type FG1B
Gas Pressure Regulator Anello type FS1B
Gas Pressure Regulator Anello type ST4B
Fitur
The gas governors are in accordance with UNI EN88-2 specification (2009/142/CE gas regulation).
The governors are suitable to systems installation with automatic gas burners including mixed and combined systems and to in industrial distribution systems.
Anello Gas Filters
Description
Anello Gas Filters serves to prevent the entry of dust or dirt particles carried by gas and air. These gas filters are produced with high quality so that they can be operationalized over a long period of time.
Type
Anello Gas filter 70600 Series
Anello Gas filter type 70609 Rp 1/2"
Anello Gas filter type 70608 Rp 3/4"
Anello Gas filter 70600/1B Series
Anello Gas filter type 70611/1B Rp 1/2"
Anello Gas filter type 70612/1B Rp 3/4"
Anello Gas filter type 70602/1B Rp 1"
Anello Gas filter type 70604/1B Rp 1"1/4
Anello Gas filter type 70603/1B Rp 1"1/2
Anello Gas filter type 70631/1B Rp 2"
Anello Gas filter type 70603F/6B DN 40
Anello Gas filter type 70631F/6B DN 50
Anello Gas filter type 70610F/6B DN 65
Anello Gas filter type 70620F/6B DN 80
Anello Gas filter type 70640F/6B DN 100
Anello Gas filter type 70650F/6B DN 125
Anello Gas filter type 70660F/6B DN 150
Anello Gas filter 70600/6B Series
Anello Gas filter type 70611/6B Rp 1/2"
Anello Gas filter type 70612/6B Rp 3/4"
Anello Gas filter type 70602/6B Rp 1"
Anello Gas filter type 70604/6B Rp 1"1/4
Anello Gas filter type 70603/6B Rp 1"1/2
Anello Gas filter type 70631/6B Rp 2"
Anello Gas filter 70680 Series
Anello Gas filter type 70684 Rp 1"
Anello Gas filter type 70685 Rp 1.1/4"
Anello Gas filter type 70686 Rp 1.1/2"
Anello Gas filter type 70687 Rp 2"
Fitur
-
Anello Anti Vibration Joint
Description
Distributor Anello Anti Vibration Joint - Anello Anti Vibration Joint is a connection tool that functions as a vibration damper in the gas fuel line. It is manufactured to standard-compliant specifications (DIN & ISO) and has been certified under the Pressure Equipment Directive (PED). We have stocks product of Anello Anti Vibration Joint with the following types
Type
Anello Anti Vibration Joint type GA Anello Anti Vibration Joint type GAF
Fitur
-
Anello Solenoid Valves
Description
Distributor Anello Solenoid Valves - Anello Solenoid Valves is a valve that is controlled by AC or DC electric current through the coil with manual reset. Equipped with IP 65 protection and suitable for gas & air.
Type
Anello Gas Solenoid Valve type N.O. MSV12/6B
Anello Gas Solenoid Valve type N.O. MSV34/6B
Anello Gas Solenoid Valve type N.O. MSV100/6B
Anello Gas Solenoid Valve type N.O. MSV112/6B
Anello Gas Solenoid Valve type N.O. MSV114/6B
Anello Gas Solenoid Valve type N.O. MSV200/6B
Anello Gas Solenoid Valve type N.O. MSV212/6B
Anello Gas Solenoid Valve type N.O. MSV300/6B
Anello Gas Solenoid Valve type N.O. MSV400/6B
Anello Gas Solenoid Valve type N.O. MSV500/6B
Anello Gas Solenoid Valve type N.O. MSV600/6B
Anello Gas Solenoid Valve type N.O. MSV800/6B
Anello Gas Solenoid Valve type N.O. MSV1200/6B
Fitur
-
Seitron Gas Detectors Gas Analyzer and Detector
Description
Detektor Gas Seitron berfungsi untuk mendeteksi kebocoran gas dengan standar protokol komunikasi MODBUS®RTU. Seperti yang kita ketahui Modbus® telah menjadi protokol standar yang biasa digunakan untuk menghubungkan peralatan elektronik industri. Detektor gas juga dapat mendeteksi uap LPG, CNG, Karbon Monoksida (CO), dan bensin.
Type
Gas Detector industrial control unit 2-8 zones type RYM02M Gas Detector industrial control 32 channels RYK01M Gas Detector control unit system 4 zones up to 256 inputs type RYB01M
Fitur
Power supply 230V ~ / 12Vdc
MASTER device with RS485 serial communication according to the MODBUS® protocol.
Manages up to 32 Concentrators (SLAVE devices - ACIM01).
Wide freedom of parameter configuration.
Storage of the conditions of the last alarm.
Equipped with 5 outputs with voltage free exchange contacts (4 alarm relays +1 auxiliary relay).
2 x 16 character backlit LCD display.
9 module DIN rail mounting.
Complies with the performance standard EN60079-29-1.
It manages transmitters for CO, LPG, Methane (CH4) and Vapors
gasoline (n-octane).
Seitron Gas Analyzer Chemist 100
Description
Distributor Seitron - Seitron Gas Analyzer Chemist 100 Be Green is manufactured with the utmost care for the environment. The "Be Green" analyzer comes without a printer, to reduce paper usage. All analyzes carried out by Chemist 100 can be accessed with a smartphone. Equipped with a Bluetooth® module, which allows long-distance communication
Type
Seitron Gas Analyzer Chemist 100 Be Green
Fitur
CO measurement cell 1 ppm resolution
Gas sensorsPrecalibrated and field replaceable gas cells
Temperature measurement Flue gas, room and outdoor air temperature
Other measurementGage and Pressure Differential
Calculated values CO2, boiler efficiency (including condensing), stack losses
Memory 5 complete analysis
Batteries Rechargeable Lithium Ion Batteries
Autonomy 10 hrs.
Bluetooth Class 1 (up to 100 m)
Self diagnosticSelf diagnostic function with sensors status
Fuels 15 pre-programmed
HolsterRubber protection holster
Dimensions 70x60x170 mm
Peso 0,35 Kg
Compliant withEN 50379-1, EN 50379-2 and UNI 10389-1
Honeywell Gas Pressure Regulator
Description
Distributor Gas Pressure Regulator - Jual Gas Pressure Regulator . Honeywell 370 Gas Pressure Regulator serves to stabilize the outlet pressure independently of any changes in inlet pressure and flow rate in the control line. HON 370 consists of several assembly diaphragms, one of which is an SSV control element which stops the gas flow if the outlet pressure exceeds a predetermined limit. We have stocks product of Gas Pressure Regulator Honeywell with the following types.
Type
Honeywell Gas Pressure Regulator type HON 370 Honeywell Gas Pressure Regulator type HON 270 MK2
Fitur
Version with integral overpressure protection (IS)
Fail open (FO) error type
Gas pressure regulator with incorporated axial safety shut-off valve (SSV) – optional designs with safety relief valve (SRV) for the relief of leakage gases or with safety diaphragm
Large inlet pressure range
Optional installation of different valve seat diameters is possible
Easy to maintain, thanks to interchangeable functional units (plug-in modules)
SSV optionally available in function class A or B
Pressure equalisation valve (internal bypass) integrated in the SSV actuator
Dungs GRMS
Description
Distributor Dungs GRMS - Dungs designs gas installations for all types of applications, regardless of the problems that may arise. Dungs offers expert expertise in gas equipment, with the assurance of finding the best solution for specific conditions.
Type
Gas Control, Measurement and Safety Systems (GRMS)
Fitur
High-performance gas engine operated with low BTU gas equipped with Tecjet
Cogeneration unit operated with wood gas - GRS with separate connection options for pre-purging with hot nitrogen for temperature control and inertisation
Gas engine for dual-fuel operation
Glass furnace
Tunnel furnace for firing ceramic building materials
Continuous drying furnace for sanitary engineering
Baking unit for waffle production
Dungs Pressure Regulators
Description
These pressure regulators are designed for gas burners and gas equipment. It has an adjustable setpoint spring which can be exchanged for different ranges. We have stocks product of Pressure Regulator Dungs with the following types.
Type
Dungs Pressure Regulator FRG -
Dungs Pressure Regulator FRI -
Dungs Pressure Regulator FRM DN 25 – DN 50 -
Dungs Pressure Regulator FRM DN 65 – DN 80 -
Dungs Pressure Regulator FRM-NOC -
Dungs Pressure Regulator FRNG -
Dungs Pressure Regulator FRS -
Dungs Pressure Regulator FRS -
Dungs Pressure Regulator FRS -
Dungs Pressure Regulator FRSBV -
Dungs Pressure Regulator FRSBV -
Dungs Pressure Regulator FRU -
Dungs Pressure Regulator SAV DN 25 - DN 50 -
Dungs Pressure Regulator SAV DN 65 - DN 80 -
Fitur
Inlet pressures up to 25 bar (2 500 kPa)
High flow rate
Stable, accurate and sensitive regulation of the outlet pressure
Admission pressure compensation diaphragm for a high regulation accuracy
External impulse
Maintenance-friendly
Flange connection according to DN 25 - DN 50
CSA Certified
European Community
UL Unlisted Component
Commonwealth of Massachsetts Approved Product
US, Canadian and EU Models
DUNGS is an ISO 9001 manufacturing facility
Dungs GasMultiBloc
Description
The servo pressure regulator permits optimal mixture formation in forced air burners and premix burners in combination with mechanical or electronic gas/air regulation units. This applies to modulating and multistage variable operating modes. We have stocks product of Gas Multi Block Dungs with the following types.
Type
Dungs GasMultiBloc MBC
This MB GasMultiBloc MBC integrates a filter, servo pressure regulator, two class A valves and a pressure switch in one compact unit. They represent the newest and most modern series of Dungs gas blocks.
The modular system provides individual solutions in gas safety and control systems
MBC-65 and MBC-120 models are used for one-stage mode burners. In MBC-...-SE models the servo pressure regulator permits optimal mixture formation in forced air burners and premix burners in conjunction with mechanical or electronic integrated gas-air regulation units; it applies to modulating and multi-stage operating mode.
The two valves are fast opening and fast closing, the dirt trap is different according to the type (see table below).
Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
Reference value spring is installed permanently, no spring replacement possible for MBC-65 and MBC-120. Bigger models have different type of springs for different pressure ranges. They can also be equipped with versions for zero pressure and gas-air ratio control .
Optional external pulse for MBC-1900 - 5000.
High flow valves at low pressure difference.
Simple mounting, compact, light-weight.
MBC-...-SE can also be used to replace the old double solenoid gas valves DMV-SE and MBC-...-VEF replaces DMV-VEF.
Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
Dungs GasMultiBloc MB-DLE - Single Stage Operation
This GasMultiBloc MB-DLE integrates a filter, pressure regulator, two class A valves, a bypass valve (B07) and pressure switches in one compact fitting.
The modular system permits individual solutions by using external ignition gas tap in connection with separately controlled valves, by adding a valve proving system, min/max pressure switches, pressure limiters, partial volume setting by closing stroke limiter at valve V2 and regulator blocking for liquid gas applications.
Maximum operating pressure is 360 mbar (200 mbar for MB-DLE 403), ambient temperature -15÷70ºC (only above 0 for LPG), degree of protection IP 54.
The two valves are controlled in common or separated, depending on the model; both are fast closing. V1 is with fast-opening and V2 with slow-opening
Main volume restrictor at valve V2.
MB-DLE B07 series has an additional bypass valve with fast opening.
Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
The pressure regulator has a setpoint spring permanently installed, no exchange possible. A vent line above roof is not required.
MB-DLE 403-412 models have a fine mesh sieve, replacement only possible by dismounting the fitting. MB-DLE 415 and 420 have a pre-mount filter that can be changed without removing the valve.
Simple mounting, compact, light-weight.
Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
Dungs GasMultiBloc MB-ZRDLE (MB-ZR) - Two Stage Operation
This MB GasMultiBloc MB-ZRDLE integrates a filter, pressure regulator, two class A valves, a bypass valve (B07) and pressure switches in one compact fitting.
The modular system permits individual solutions by using external ignition gas tap in connection with separately controlled valves, by adding a valve proving system, min/max pressure switches, pressure limiters, limit switch and closing stroke limiter at valve V2, regulator blocking for liquid gas applications.
Maximum operating pressure is 360 mbar, ambient temperature -15÷70ºC (only above 0 for LPG), degree of protection IP 54.
The two valves are controlled in common or separated, depending on the model; both are fast closing. V1 is with fast-opening and V2 with fast or slow-opening
Main volume restrictor and partial volume restrictor at valve V2.
MB-ZRDLE B07 series has an additional bypass valve with one stage and fast opening.
Different pressure switch types mountable: GW A5, NB A2, UB A2. Standard equipped with GW 150 A5.
The pressure regulator has a setpoint spring permanently installed, no exchange possible. A vent line above roof is not required.
MB-ZRDLE 405-412 models have a fine mesh sieve, replacement only possible by dismounting the fitting. MB-ZRDLE 415 and 420 have a pre-mount filter that can be changed without removing the valve.
Simple mounting, compact, light-weight.
Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
Dungs GasMultiBloc MB-VEF
This GasMultiBloc MB-VEF integrates a filter, gas/air ratio controls, two class A valves and a pressure switch.
The gas/air ratio control ensures optimal mixture formation in forced air burners and pre-mix burners; this applies to floating and two-step floating operations.
Maximum operating pressure is 360 mbar, output pressure range 0.5÷100 mbar, ambient temperature -15÷70ºC.
Ratio V = pburner/pblower, air 0.75:1 up to 3:1.
Zero point adjustment N.
Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
External pulse lines, pulse flange.
The modular kit ensures individual solutions comprising valve proving system, min/max pressure switches and pressure limiters.
Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
Fitur
Ease of installation
Suitable for high pressure applications
Longer service life
Efficient regulation operation
We have following Items in our stock.
Burner Management Systems Automatic Burner Controls
Pressure regulators Pressure switches for gas and air
Solenoid valves
Double solenoid valves Multi Block.
Gas Multi Block Multifunctional gas controls
Valve proving systems Line leakage testers Laboratory
System engineering Gas trains
Ball valve Filters
Motor butterfly valves & Actuators
Accessories
Dungs Double Solenoid Valve
Description
DUNGS DMV integrates two solenoid valves in one compact fitting. Double solenoid valves are used where two single valve were mounted previously. We have stocks product of Double Solenoid Valve Dungs with the following types.
Type
Dungs Double Solenoid Valve DMV 5 -
Dungs Double Solenoid Valve DMV 11 eco -
Dungs Double Solenoid Valve DMV 12 -
Dungs Double Solenoid Valve DMV 525 -
Dungs Double Solenoid Valve DMV 602 -
Dungs Double Solenoid Valve DMV 604L NEMA 4x -
Dungs Double Solenoid Valve DMV 622 & POC -
Dungs Double Solenoid Valve DMV 624L NEMA 4 & POC -
Dungs Double Solenoid Valve DMV 704 NEMA 4 & POC -
Dungs Double Solenoid Valve DMV 704 NEMA 4 -
Dungs Double Solenoid Valve DMV 50050 -
Dungs Double Solenoid Valve DMV eco 6xx -
Dungs Double Solenoid Valve DMV ZR 602 -
Dungs Double Solenoid Valve DMV ZR 612 & POC -
Dungs Double Solenoid Valve DMV-D(LE) 11 -
Dungs Double Solenoid Valve DMV-D11 -
Dungs Double Solenoid Valve DMV-SE 507-525 11 -
Dungs Double Solenoid Valve DMV-VEF 507-525 -
Dungs Double Solenoid Valve Vent Line Adapter DMV 7xx -
Dungs Double Solenoid Valve DMV & Vent Line Adapter -
Fitur
Low power consumption
Low weight
Compact design
High flow rates
Max. operating pressure 500 mbar (50 kPa), 5000 mbar (5 bar, 500 kPa)
Fast closing
Fast opening
Automatic shut-off valves as per DIN EN 161 Class A Group 2
Two A valves in one housing
Double seat valves
Mountable closed position signal contact
DC solenoid
CSA Certified
EU Gas Appliance Regulation EN161
DUNGS is an ISO 9001 manufacturing facility
Dungs Gas Filter
Description
Dungs Gas Filter. These gas and air filters GF have a high dust storage capacity and are designed for protecting downstream fittings. We have stocks product of gas filter Dungs with the following types.
Type
Gas and air filter Dungs GF/1: Rp ½ – Rp 2
Gas and air filter Dungs GF/3: DN 25 – DN 40, DN 125 – DN 200
Gas and air filter Dungs GF/4: DN 50 – DN 100
Fitur
Filter for interior gas lines, acc. DIN 3386 (max 5 bar) with high dust storage capacity.
Type GF/1, GF/3, GF/4 gas and air filter for protecting downstream fittings.
Filter suitable for gases of families 1, 2, 3 and other neutral gaseous media.
