sparepart burner Kromschroder Burner Control | Burner Parts

Kromschroder burner control IFS 110 IM is an automatic burner control unit suitable for the ignition and control of the combustion gases of all types of gas firing installations. This burner control is designed for high frequencies and is made of impact-resistant plastic material for maximum long-term operation.

Type

Kromschroder Burner Control Automatic IFS 110 IM

Fitur

Flame control by means of flame rod or UV-detector
Flame simulation check before starting and after switching the burner off
Suitable for ignition and ionisation control with one electrode
Modern technique using semiconductors
High cycling frequency
Remote reset
External fault indication
FM approved
Kromschröder is a company certified to ISO 9001

Honeywell Gas Pressure Regulator | Gas Equipment

Distributor Gas Pressure Regulator - Jual Gas Pressure Regulator . Honeywell 370 Gas Pressure Regulator serves to stabilize the outlet pressure independently of any changes in inlet pressure and flow rate in the control line. HON 370 consists of several assembly diaphragms, one of which is an SSV control element which stops the gas flow if the outlet pressure exceeds a predetermined limit. We have stocks product of Gas Pressure Regulator Honeywell with the following types.

Type

Honeywell Gas Pressure Regulator type HON 370
Honeywell Gas Pressure Regulator type HON 270 MK2

Fitur

    Version with integral overpressure protection (IS)
    Fail open (FO) error type
    Gas pressure regulator with incorporated axial safety shut-off valve (SSV) – optional designs with safety relief valve (SRV) for the relief of leakage gases or with safety diaphragm
    Large inlet pressure range
    Optional installation of different valve seat diameters is possible
    Easy to maintain, thanks to interchangeable functional units (plug-in modules)
    SSV optionally available in function class A or B
    Pressure equalisation valve (internal bypass) integrated in the SSV actuator

sparepart burner Kromschroder Photocell | Burner Parts

Kromschroder Photocell has a sensor called UV. The task of the UV sensor is to detect ultraviolet light from the flame and then connect it to the burner control. UV sensors will not respond to daylight, incandescent lamps or infrared radiation.

Type

Kromschroder Photocell type UVS 5
Kromschroder Photocell type UVS 10

Fitur

Virtually immune to interference due to its insensitivity to daylight, infrared radiation and incandescent bulbs
Maximum safety thanks to protection against discontinuity or short-circuit on the flame signal cable
Suits industrial needs due to robust design
Complies with the requirements of EN 298 in conjunction with Kromschröder automatic burner control units and burner control units