Dungs Gas Regulator FRS 515

Dungs Gas Regulator FRS 515
Get Best Offer
Dungs Gas Regulator FRS 515. This regulator type has an adjustable setpoint spring that can adjust the output pressure based on how it's adjusted and the installation position. The function of a gas pressure regulator is to stop the flows of gas or liquids when the pressure reaches a define level.
Brand :

Dungs

Category :

Gas Equipment

Share :

Distributor Dungs Gas Regulator FRS 515

Dungs Gas Regulator FRS 515 

This regulator type has an adjustable setpoint spring that can adjust the output pressure based on how it's adjusted and the installation position. The function of a gas pressure regulator is to stop the flows of gas or liquids when the pressure reaches a define level. The pressure regulator is equipped with the blue spring as standard. By exchanging the adjustable spring, other output pressures can be adjusted.


Specifications: 

  • Nominal Diameter: 40
  • Connection: flange (PN 16) as per DIN EN 1092-1
  • Pipe thread as per ISO 7/1:  Rp 1 1/2
  • Max Operating Pressure: Up to 500 mbar (50 kPa)
  • Material: Housing  (Aluminium, Steel), Seals and diaphragms (NBR)
  • Temperature: -15 °C until 70 °C 
Application: 
          A gas pressure regulator is used for the regulation of gas pressure in gas burners and gas equipment.  It does not contain any non ferrous metal. Acceptable for gases of families 1, 2, 3 and other neutral gaseous media. 


Instructions: 
1. Try not to course condensate from lines into the gas pressure regulator.
2. Protect the pressure regulator from fouling through a reasonable dirt  trap.
3. Try not to apply ignition gas or burning gas air combinations to the installation chamber of the adjustable spring.



      Type

      Dungs Gas Regulator FRS 515

      Fitur

      -