Dungs Pressure Switch GW 500 A5

Dungs Pressure Switch GW 500 A5
Get Best Offer
Dungs Pressure Switch GW 500 A5 is a compact pressure switch as per EN 1854 for DUNGS multiple actuators. The pressure switches are suitable for switching a circuit on, off or over on changes in actual pressure relative to the set switching point (reference value). The switching point can be set easily and quickly using a setting wheel provided with a scale without using a pressure gauge.
Brand :

Dungs

Category :

Pressure Measurement

Share :

Distributor Dungs Pressure Switch GW 500 A5

SPECIFICATIONS

Maximum Operating Pressure
- GW 3 A5 – GW 150 A5 : 500 mbar (50 kPa)
- GW 500 A5 : 600 mbar (60 kPa)

Pressure Connection
- O-ring flange connection on the underside of the pressure switch

Measuring Connection
- Ø9 mm × 10 mm length, with screw plug

Temperature Range
- Ambient : -15°C to +70°C
- Medium : -15°C to +70°C
- Storage : -30°C to +80°C

Materials
- Housing : Die-cast aluminum
- Switch : Polyamide
- Diaphragm : NBR
- Switching Contact : Silver (Ag)

Switching Voltage
- AC : 24 – 250 VAC
- DC : 24 – 48 VDC

GW 10 A5 – GW 500 A5
- AC (cos φ = 1.0) : Max. 6 A
- AC (cos φ = 0.6) : Max. 3 A
- AC (minimum) : 20 mA
- DC : 20 mA – 1 A

Electrical Connection
- 3-pin plug connection for line sockets
- DIN EN 175 301-803
- Double insulated (without ground connection)

Degree of Protection
- IP54 (IEC 529 / EN 60529)

Setting Tolerance
- ±15% switching point deviation from the reference value
- Calibrated for rising pressure with the diaphragm installed in the vertical position

Type

Dungs Pressure Switch GW 500 A5

Fitur

-