Gestra Check Valve

Gestra check valves are manufactured to the highest quality and precisely matched to customer requirements. Gestra check valves are wafer type valves, they have considerable structural and hydrodynamic advantages over conventional valves. We offer products of Check Valve Gestra with the following types.

Type

Gestra Gravity Circulation Check SBO - DOWNLOAD
Gestra Screwed Non-Return Valve MB - DOWNLOAD
Gestra Non-Return Valves RK 16 - DOWNLOAD
Gestra Non-Return Valves RK 26A - DOWNLOAD
Gestra Non-Return Valves RK 29A - DOWNLOAD
Gestra Non-Return Valves RK 41 & RK 44 - DOWNLOAD
Gestra Non-Return Valves RK 44S - DOWNLOAD
Gestra Non-Return Valves RK 49 - DOWNLOAD
Gestra Non-Return Valves RK 70& RK 71 - DOWNLOAD
Gestra Non-Return Valves RK 76 - DOWNLOAD
Gestra Non-Return Valves RK 86 - DOWNLOAD
Gestra Dual Plate Check Valves BB - DOWNLOAD
Gestra Swing Check Valves CB - DOWNLOAD
Gestra Swing Check Valves WB - DOWNLOAD
Gestra NAF Swing Check Valves - DOWNLOAD

Fitur

    Compact design
    Low weight
    Any installation position
    Low installation costs
    Large choice of materials
    Space-saving storage
    Reliable operation of industrial systems
    Minimal pressure losses

Gestra Blowdown Valve

Gestra blowdown valve is produced with high quality, resulting in maximum boiler safety and long-term operating time. This type of valve functions to control the concentration of solids / total dissolved (TDS) in the boiler. We offer Gestra blowdown valve with the following types.

Type

Rapid-Action Intermittent Blowdown Valve - 

    GESTRA Blowdown Valve PA 46, PN 40 / CLASS 150 / 300, DN 20-50
    GESTRA Blowdown Valve PA 47, PN 63 / CLASS 600, DN 25, 40, 50
    GESTRA Blowdown Valve PA 48, PN 100 / CLASS 600, DN 25, 40, 50
    GESTRA Blowdown Valve MPA 46, PN 40 / CLASS 150 / 300, DN 20-50
    GESTRA Blowdown Valve MPA 47, PN 63 / CLASS 600, DN 25, 40, 50
    GESTRA Blowdown Valve MPA 48, PN 100 / CLASS 600, DN 25, 40, 50

Programme-Controlled Blowdown System - 

    Gestra Automatic Intermittent Blowdown Control TA 7

Fitur

    Rapid-Action Intermittent Blowdown Valve PA 47 – manual operation
    Rapid-Action Intermittent Blowdown Valve MPA 47 with diaphragm actuator
    Hand lever with clip fastener
    Separate pretensioning
    Wear-protection by downstream, integrated radial assembly level cone
    Tell-tale hole inside the protection pipe
    Leakage control
    Assembly kit 335130 for retrofitting the actuator of an existing MPA 26 or MPA 27 in a PA 46 or PA 47 to upgrade them to an MPA 46 or MPA 47 (guide bushing with washer and spacer disc).
    Diaphragm actuator 337866 for PA 4x (diaphragm actuator, spacer disc).
    TA program controller for MPA 4x n Retrofit kit 337980 containing proximity switch for MPA 4x (one limit switch).
    Retrofit kit 337946 containing proximity switch for MPA 4x (two limit switches).
    Emergency lever 337867 for MPA 46/47 and 338073 for MPA 48.
    The cycling timer PRS 8 is mounted in an appliance plug socket fitted on the three-way solenoid valve.

Gestra Pressure Reducing Valve

Pressure regulation of steam, gas and fluids in all energy and process networks. We have stock products of pressure reducing valve and maintaining valve GESTRA with the following types.

Type

    Gestra Pressure Reducing Valve 5801
    Gestra Pressure Maintaining Valve 5610
    Gestra Clorius Temperature Regulator

Fitur

    Thermostatic Steam Traps MK
    Thermodynamic Steam Traps DK
    Pressure Reducing Valve

Gestra Thermostatic Steam Traps BK | Steam Equipment

Jual Gestra Thermostatic Steam Traps BK | Distributor Gestra Thermostatic Steam Traps BK. Thermostatic steam traps for removing condensate from steam or for venting steam pipes. The features of steam traps BK series highly responsive, very efficient and extremely resistant. We have stock products of thermostatic steam traps BK Series Gestra with the following types.

Type

    Gestra Thermostatic Steam Trap BK 15
    Gestra Thermostatic Steam Trap BK 27N
    Gestra Thermostatic Steam Trap BK 37/28/29 & BK 37/28/29-ASME
    Gestra Thermostatic Steam Trap BK 45/46
    Gestra Thermostatic Steam Trap BK 212 & BK 212-ASME

Fitur

    Robust regulator for roughest operating conditions (unaffected by waterhammer and frost)
    Suitable for superheated steam applications
    Automatic air-venting (steam trap can be used for thermal
    air-venting in steam systems)
    Installation in any position (horizontal and vertical lines)
    Stage nozzle acts as non-return valve
    Extremely good start-up performance
    No loss of steam
    Suitable for differential pressure up to 275 bar
    Able to cope with the harshest operating conditions
    Any installation position – in horizontal or vertical pipes
    Inner parts made of corrosion-resistant stainless steel
    Can be serviced without removing the body from the pipe
    Metal base bushing provides the seal between the body and bimetallic regulator
    Stage nozzle for non-return valve action
    Wear-resistant

Gestra Thermodynamic Steam Traps DK | Steam Equipment

Jual Gestra Thermodynamic Steam Traps DK | Distributor Gestra Thermodynamic Steam Traps DK. Thermostatic steam traps for removing condensate from steam or for venting steam pipes. The features of steam traps BK series highly responsive, very efficient and extremely resistant. We have stock products of thermostatic steam traps BK Series Gestra with the following types.

Type

    Gestra Thermostatic Steam Trap BK 15
    Gestra Thermostatic Steam Trap BK 27N
    Gestra Thermostatic Steam Trap BK 37/28/29 & BK 37/28/29-ASME
    Gestra Thermostatic Steam Trap BK 45/46
    Gestra Thermostatic Steam Trap BK 212 & BK 212-ASME

Fitur

    Discharge with virtually no banking-up
    Robust, insensitive regulator
    Installation in any position
    Max. admissible back pressure 80 % of the upstream pressure
    Compact, highly responsive regulator
    Small number of functional parts
    Drainage with practically no banking-up
    Any installation position – in horizontal or vertical pipes
    Reliable back pressure up to 80% of upstream pressure
    Available as an easy-to-install RHOMBUSline body with exchangeable regulator, or as a compact version
    Inner parts made of corrosion-resistant stainless steel

Gestra Vaposcope Steam Traps | Steam Equipment

Jual Gestra Vaposcope Steam Traps | Distributor Gestra Vaposcope Steam Traps. Extremely clear and simple visual function test. Sightglass with borosilicate glass for checking heat exchangers and steam traps (installation upstream of traps). Visual supervision of flow conditions in condensate lines. We have stock products of vaposcope steam traps GESTRA with the following types.

Type

    Gestra Vaposcope VK 14
    Gestra Vaposcope VK 16

Fitur

    Body with straight through design and two opposing borosilicate sightglasses for improved viewing
    With mica disk as standard for higher pH values
    Valve without moving parts
    The special design of the GESTRA Vaposcope makes any loss of steam clearly visible

Gestra Drainage Module QuickEM | Steam Equipment

Jual Gestra Drainage Module QuickEM | Distributor Gestra Drainage Module QuickEM. Gestra Drain Modules QuickEM are completely interconnected units for horizontal or vertical installation with or without bypass. They come with valves and steam traps, non-return valves, sightglass and shut-off valves as well as all necessary pipes, fittings, flanges, gaskets and screws. We offer Gestra drainage modules with the following types.

Type

    Gestra Steam Trap Drainage Module QuickEM
    Gestra Steam Trap Drainage Module QuickEM Control

PRODUK :
    Check Valve
    Ball Float Steam Traps
    Pressure Reducing Valve

Fitur

    Preassembled steam trap module with the recommended additional valves
    Saves time on installation
    Keeps installation errors to a minimum
    Also available without bypass
    QuickEM-Control with integrated monitoring electrode
    Standardised lengths
    For horizontal or vertical installation
    Also available in stainless steel

Gestra Ball Float Steam Traps | Steam Equipment

Jual Ball Float Steam Traps | Jual Ball Float Steam Traps. Steam traps with ball float for removing condensate from steam, cold condensate or distillates without banking-up. We have stock products of ball float steam traps UNA Series Gestra with the following types.

Type

    Gestra Ball Float Steam Traps UNA 14 PN 25 DN 15-25
    Gestra Ball Float Steam Traps UNA 16 PN 40 DN 15-25
    Gestra Ball Float Steam Traps UNA 43 PN 16 / CLASS 125 DN 80-150
    Gestra Ball Float Steam Traps UNA 45 PN 40 / CLASS 300 DN 15-65
    Gestra Ball Float Steam Traps UNA 46 PN 40 / CLASS 300 DN 15-65, DN 80-150
    Gestra Ball Float Steam Traps UNA 38 PN 100 DN 15-50
    Gestra Ball Float Steam Traps UNA 39 PN 160 DN 15-50
    Gestra Ball Float Steam Traps UNA Special PN 63

Fitur

    Unaffected by back pressure and condensate temperature
    No loss of live steam due to continuous water seal at the seat
    No banking-up of condensate even with extreme load and pressure fluctuations
    Particularly well suited for heat exchangers controlled from the steam side
    Unaffected by dirt
    Automatic thermostatic air-venting (Duplex design)
    Ideal for discharging cold condensates, distillates and condensates derived from chemical products (Simplex design)
    Repairable in-line
    Thanks to the rolling ball valve only reduced operating forces and small control units are required (compact, lightweight design for large flowrates)
    Internals made from corrosion-resistant stainless steels
    UNA 14, 16, 45, 46, 38: Body can be easily repositioned to convert the flow direction from left to right or vice versa or to change to vertical flow.
    UNA 45, 46 DN 40-65 optionally available with MAX controller for very large flowrates (conversion standard -> MAX controller not possible).

Gestra Thermostatic Steam Traps MK | Steam Equipment

Jual Gestra Thermostatic Steam Traps MK | Distributor Gestra Thermostatic Steam Traps MK . Thermostatic steam traps for removing condensate from steam or for venting steam pipes. The distinguishing feature of the MK series is the excellent responsiveness of the membrane regulator. We have stock products of thermostatic steam traps MK Series GESTRA with the following types.

Type

    Gestra Thermostatic Steam Trap MK 25
    Gestra Thermostatic Steam Trap MK 35
    Gestra Thermostatic Steam Trap MK 36
    Gestra Thermostatic Steam Trap MK 45

Fitur

    Very sensitive response characteristic
    Function is not impaired by high back pressure
    Automatic air-venting (trap can be used for thermal air-venting in steam systems)
    Installation in any position (horizontal and vertical lines)
    High hot-water capacities even with low differential pressures
    With tandem seat (double sealing) for low condensate flowrates
    Built-in non-return valve (only MK 45)
    Stainless steel internals (corrugated membrane of Hastelloy)
    Design “U” with undercooling capsule: utilization of a certain amount of sensible heat by banking-up of condensate, decreasing the amount of flash steam
    Optional extra: Integrated condensate monitoring for MK 45 (temperature or steam loss)

Gestra Level Switches

We offer the fifth generation of water level switch which is one of the safety components in the boiler. This new product provides a solution that complies with the technical literature, increases safety in operations and reduces costs.

Type

    Gestra Level Electrode NRG 16-50
    Gestra Level Switch NRS 1-50
    Gestra Level Electrode NRG 16-4
    Gestra Level Switch NRS 1-52
    Gestra Logic Unit SRL 6-50
    Gestra Level Electrode NRG 16-51
    Gestra Level Switch NRS 1-51

Fitur

-

Sparepart Boiler Gestra Blowdown Valve | Boiler Parts

Gestra blowdown valve is produced with high quality, resulting in maximum boiler safety and long-term operating time. This type of valve functions to control the concentration of solids / total dissolved (TDS) in the boiler. We offer Gestra blowdown valve with the following types.

Type

Rapid-Action Intermittent Blowdown Valve - 

    GESTRA Blowdown Valve PA 46, PN 40 / CLASS 150 / 300, DN 20-50
    GESTRA Blowdown Valve PA 47, PN 63 / CLASS 600, DN 25, 40, 50
    GESTRA Blowdown Valve PA 48, PN 100 / CLASS 600, DN 25, 40, 50
    GESTRA Blowdown Valve MPA 46, PN 40 / CLASS 150 / 300, DN 20-50
    GESTRA Blowdown Valve MPA 47, PN 63 / CLASS 600, DN 25, 40, 50
    GESTRA Blowdown Valve MPA 48, PN 100 / CLASS 600, DN 25, 40, 50

Programme-Controlled Blowdown System - 

    Gestra Automatic Intermittent Blowdown Control TA 7

Fitur

    Rapid-Action Intermittent Blowdown Valve PA 47 – manual operation
    Rapid-Action Intermittent Blowdown Valve MPA 47 with diaphragm actuator
    Hand lever with clip fastener
    Separate pretensioning
    Wear-protection by downstream, integrated radial assembly level cone
    Tell-tale hole inside the protection pipe
    Leakage control
    Assembly kit 335130 for retrofitting the actuator of an existing MPA 26 or MPA 27 in a PA 46 or PA 47 to upgrade them to an MPA 46 or MPA 47 (guide bushing with washer and spacer disc).
    Diaphragm actuator 337866 for PA 4x (diaphragm actuator, spacer disc).
    TA program controller for MPA 4x n Retrofit kit 337980 containing proximity switch for MPA 4x (one limit switch).
    Retrofit kit 337946 containing proximity switch for MPA 4x (two limit switches).
    Emergency lever 337867 for MPA 46/47 and 338073 for MPA 48.
    The cycling timer PRS 8 is mounted in an appliance plug socket fitted on the three-way solenoid valve.

Gestra Ball Float Steam Traps | Steam Equipment

Jual Ball Float Steam Traps | Jual Ball Float Steam Traps. Steam traps with ball float untuk menghilangkan kondensat dari uap, kondensat dingin atau sulingan tanpa bank-up. Kami memiliki stok produk ball float steam traps UNA Series Gestra dengan type sebagai berikut.

Type

    Gestra Ball Float Steam Traps UNA 14 PN 25 DN 15-25
    Gestra Ball Float Steam Traps UNA 16 PN 40 DN 15-25
    Gestra Ball Float Steam Traps UNA 43 PN 16 / CLASS 125 DN 80-150
    Gestra Ball Float Steam Traps UNA 45 PN 40 / CLASS 300 DN 15-65
    Gestra Ball Float Steam Traps UNA 46 PN 40 / CLASS 300 DN 15-65, DN 80-150
    Gestra Ball Float Steam Traps UNA 38 PN 100 DN 15-50
    Gestra Ball Float Steam Traps UNA 39 PN 160 DN 15-50
    Gestra Ball Float Steam Traps UNA Special PN 63

Fitur

    Unaffected by back pressure and condensate temperature
    No loss of live steam due to continuous water seal at the seat
    No banking-up of condensate even with extreme load and pressure fluctuations
    Particularly well suited for heat exchangers controlled from the steam side
    Unaffected by dirt
    Automatic thermostatic air-venting (Duplex design)
    Ideal for discharging cold condensates, distillates and condensates derived from chemical products (Simplex design)
    Repairable in-line
    Thanks to the rolling ball valve only reduced operating forces and small control units are required (compact, lightweight design for large flowrates)
    Internals made from corrosion-resistant stainless steels
    UNA 14, 16, 45, 46, 38: Body can be easily repositioned to convert the flow direction from left to right or vice versa or to change to vertical flow.
    UNA 45, 46 DN 40-65 optionally available with MAX controller for very large flowrates (conversion standard -> MAX controller not possible).