Gestra Thermostatic Steam Traps BK

Jual Gestra Thermostatic Steam Traps BK | Distributor Gestra Thermostatic Steam Traps BK. Thermostatic steam traps for removing condensate from steam or for venting steam pipes. The features of steam traps BK series highly responsive, very efficient and extremely resistant. We have stock products of thermostatic steam traps BK Series Gestra with the following types.
Brand :

Gestra

Category :

Steam Equipment

Share :

Distributor Gestra Thermostatic Steam Traps BK

Thermostatic steam traps for removing condensate from steam or for venting steam pipes. In steam traps with GESTRA Thermovit regulators, the opening and closing process is controlled by the interaction of bimetallic plates and a stage nozzle. When the plant is started up, the trap is fully open. Cold condensate and air are discharged. With rising temperature, the Duo (bimetallic) stainless steel plates bend and pull the stage nozzle into the closing position. The orifice is then closed immediately below the saturation temperature. Thermodynamic processes taking place in the stage-nozzle chamber support the closing procedure. The trap provides automatic air-venting at start-up and during operation. It is precisely this principle that makes steam traps from the BK series highly responsive, very efficient and extremely resistant. These steam traps are insensitive to frost and water hammer, resistant to corrosion and require little maintenance. The RHOMBUSline® BK 45 steam trap is used for low capacity applications such as drip and tracing, and economically combines steam trap, check valve and Y-Strainer (with optional blow off valve) in a small profile with a convenient 2-bolt cover for easy maintenance. Robust steam traps for condensate removal from heating processes with small load fluctuations.

Type

    Gestra Thermostatic Steam Trap BK 15
    Gestra Thermostatic Steam Trap BK 27N
    Gestra Thermostatic Steam Trap BK 37/28/29 & BK 37/28/29-ASME
    Gestra Thermostatic Steam Trap BK 45/46
    Gestra Thermostatic Steam Trap BK 212 & BK 212-ASME

Fitur

    Robust regulator for roughest operating conditions (unaffected by waterhammer and frost)
    Suitable for superheated steam applications
    Automatic air-venting (steam trap can be used for thermal
    air-venting in steam systems)
    Installation in any position (horizontal and vertical lines)
    Stage nozzle acts as non-return valve
    Extremely good start-up performance
    No loss of steam
    Suitable for differential pressure up to 275 bar
    Able to cope with the harshest operating conditions
    Any installation position – in horizontal or vertical pipes
    Inner parts made of corrosion-resistant stainless steel
    Can be serviced without removing the body from the pipe
    Metal base bushing provides the seal between the body and bimetallic regulator
    Stage nozzle for non-return valve action
    Wear-resistant