Gate Valve

Gate Valves are primarily designed to start or stop flow, and when straight-line fluid flow and minimum flow restriction are required. In service, these valves are generally fully open or fully closed. The Gate valve disc is completely removed when the valve is fully open; the disc is fully pulled into the valve bonnet. This leaves an opening for flow through the valve at the same inner diameter as the piping system in which the valve is installed. Gate Valves can be used for a wide variety of fluids and provide a tight seal when closed. Indotama Niaga Teknik sells quality gate valve products from well-known brands that are often used by large industries. We also sell all types of valves such as ball valve, globe valve, gate valve, butterfly valve, safety valve, strainer valve, check valve, blow down valve, piston valve, plug valve, pressure reduction valve, angel valve. We sell gate valves with well-known brands such as Zetkama, Kitz, Duyar, Asahi, and Powell Valves.

Kitz Gate Valve PN 20 E Bronze

Description

As distributor gate valve in indonesia, PT Indotama Niaga Teknik offer product from brand kitz that is Kitz Gate Valve PN 20 E Bronze. To meet the need industrial and manufacture

Type

Kitz Gate Valve PN 20 E Bronze

Fitur

-

Kitz Gate Valve PN 16 FH Brass

Description

As distributor gate valve in indonesia PT Indotama Niaga tekni offer product from brand kitz , that is Kitz Gate Valve PN 16 FH Brass, to meet the need industrial and manufacture

Type

Kitz Gate Valve PN 16 FH Brass

Fitur

-

Zetkama Flat Wedge or Knife Gate Valve PN 10

Description

As a zetkama distributor in Indonesia, PT. Indotama Niaga Teknik offers the best product from zetkama, namely Zetkama Knife Gate Valve PN 10 , as industrial and manufacturing spareparts. Get the best offers and prices from Zetkama Knife Gate Valve PN 10 just by contacting our email

Type

Zetkama Knife Gate Valve PN 10

Fitur

length of construction according to PN EN 558-1 FTF N.14
flanges with sealing surfaces (type B) are drilled according to PN EN 1092-2:
– for gate valves DN 700 – 1000 are drilled on PN 10
– for gate valves DN 1200 – 1400 are drilled on PN 2,5.

wheel for hand operation can be assembled directly on gate valve or on stanchion (execution for stanchion) depending on building place of gate valve.
gate valve  021 has root as well as stem with thread outside of body

Zetkama Gate Valve Fig 119 PN 40 PN 63 PN 100

Description

PT Indotama Niaga Teknik offers various types of zetkama such as Zetkama Gate Valve Fig 119 PN 40 PN 63 PN 100. We are a zetkama distributor from Indonesia that provides industrial and manufacturing valve spare parts

Type

Zetkama Gate Valve Fig 119 PN 40 PN 63 PN 100

Fitur

high tightness (leakproofness class – A acc. to EN – 12266 – 1)
compact settlement
environment friendly
tests acc. to EN – 12266 – 1
flanges drilled according to EN 1092-1

Zetkama Gate Valve Fig 118 PN 250

Description

As a zetkama distributor in Indonesia, PT. Indotama Niaga Teknik offers the best product from zetkama, namely Zetkama Gate Valve zFAG Fig 118 PN 250, as industrial and manufacturing spareparts. Get the best offers and prices from Zetkama Gate Valve zFAG Fig 118 PN 250 just by contacting our email

Type

Zetkama Gate Valve Fig 118 PN 250

Fitur

high tightness (leakproofness class – A acc. to EN – 12266 – 1
compact settlement
environment friendly
tests acc. to EN – 12266 – 1

Zetkama Gate Valve zGAT Fig 111 PN 10 PN 16

Description

As a zetkama distributor in Indonesia, PT. Indotama Niaga Teknik offers the best product from zetkama, namely Zetkama Gate Valve zGAT Fig 111, as industrial and manufacturing spareparts. Get the best offers and prices from Zetkama Gate Valve zGAT Fig 111 just by contacting our email

Type

Zetkama Gate Valve zGAT Fig 111

Fitur

    high tightness (leakproofness class – A according to EN – 12266 – 1)
    face-to-face dimension: series 14 according EN 558-1, F4 according to DIN 3202
    flange end connection: PN-EN-1092-2
    fusion bonded epoxy coating RAL 5002
    coating thickness: 300μm

Zetkama Gate valve zGAT Fig 112 PN 16

Description

Zetkama Gate valve zGAT Fig 112 Have High tightness (tightness level - A according to EN - 12266 - 1) Test , according to EN - 12266 - 1 End size: F5 series, according to DIN 3202 Flange end connection: PNEN10922, DIN 2501 Polyester coating adhesive Layer 44544 or other according to customer's requirements Coating thickness: 250μm Flange bore PN 10/16

Type

Zetkama Gate valve zGAT Fig 112

Fitur

High tightness (tightness level - A according to EN - 12266 - 1) 
Test according to EN - 12266 - 1 
End size: F5 series, according to DIN 3202 
Flange end connection: PNEN10922, DIN 2501 Polyester coating adhesive Layer 44544 or other 
according to customer's requirements Coating thickness: 250μm 
Flange bore PN 10/16

AsahiAV Gate valve Standart Type (Type P)

Description

Gate Valve Asahi Standart Type (Type P) - For all the wetted parts,corrosionresistant material is used. Lightweight and highly impact resistant. Made of robust lightweight and impact-resistant hard vinyl chloride (HI-PVC), with a weight of 1/3 To 1/5 Compared To metal valve. Compact design allows for shallow depth mounting (size 32 - 200 mm)

Type

AsahiAV Gate valve Standart Type (Type P)

Fitur

* Reliable Watertightness
   The rubber valve seat, a soft seal type, offers reliable shut-off.

* Provides Smooth Flow
    Being free of cavities, the valve body has no sand or foreign matter 
    build up in it, thus providing a smooth flow.

Gate Valve Asahi

Description

All Gate valves are custom made from high impact PVC and there is no metal contact with the media. The disc from inside the valve is tapered. and this type of gate valve, commonly applied in the media of water, food, pharmaceuticals, and chemicals. We have stocks product of Gate Valve Asahi with the following types.

Type

Gate Valve Asahi (FOR VACUUM SEWAGE) - DOWNLOAD
Gate Valve Asahi TYPE-S (Soft Seal) OUTSIDE SCREW ROUND HANDLE [1 1/2-8inch] 40-200mm - DOWNLOAD
Gate Valve Asahi TYPE-S (Soft Seal) CAP [2 1/2-8inch] 65-200mm - DOWNLOAD
Gate Valve Asahi TYPE 66 (Soft Seal) CAP [1 1/4-6inch] 32-150mm - DOWNLOAD
Gate Valve Asahi TYPE-P (PLUG) CAP [1 1/4-14inch] 32-350mm - DOWNLOAD
Gate Valve Asahi TYPE-P (PLUG) ROUND HANDLE [1 1/4-14inch] 32-350mm - DOWNLOAD
Gate Valve Asahi TYPE-S (Soft Seal) ROUND HANDLE [2-8inch] 50-200mm - DOWNLOAD

Fitur

    Straight-through flow with minimal pressure drop.
    Unique sliding cylindrical plug design provides larger seating area than conventional gate valves.
    Made of durable, corrosion resistant plastic. ...

Gate Valve Kitz

Description

Gate valve has an open and close function like a gate. Because this valve is at the front end to regulate any incoming water or gas. This valve is one of KITZ Corporation's product lines in Japan, the largest valve manufacturer in the industry. We have stocks product of Gate Valve Kitz with the following types.

Type

Kitz Gate Valve Fig. 10FCL - DOWNLOAD
Kitz Gate Valve Fig. 10FCLS - DOWNLOAD 
Kitz Gate Valve Fig. 10FCLU - DOWNLOAD
Kitz Gate Valve Fig. 10SMBF - DOWNLOAD
Kitz Gate Valve Fig. 10SMS - DOWNLOAD
Kitz Gate Valve Fig. 10UMAMT - DOWNLOAD
Kitz Gate Valve Fig. 10UMAT - DOWNLOAD
Kitz Gate Valve Fig. 20SLB - DOWNLOAD
Kitz Gate Valve Fig. 20SLBO - DOWNLOAD
Kitz Gate Valve Fig. 20SLS - DOWNLOAD
Kitz Gate Valve Fig. 20UMA - 20UMAM - DOWNLOAD
Kitz Gate Valve Fig. 125FCL - 125FCLS - DOWNLOAD
Kitz Gate Valve Fig. 125FCWI - DOWNLOAD
Kitz Gate Valve Fig. 150SCLS - DOWNLOAD
Kitz Gate Valve Fig. 150SMBO - DOWNLOAD
Kitz Gate Valve Fig. 150UMAM - DOWNLOAD
Kitz Gate Valve Fig. 300UMAM - DOWNLOAD
Kitz Gate Valve Fig. UEB - UEBM - DOWNLOAD
Kitz Gate Valve Fig. UEL - UELM - DOWNLOAD

Fitur

    This it used in fully closed or fully open state.
    Fluid flows in the valve in parallel to the pipe axis and when the valve is fully opened the flow resistance is very small.
    Fluid resistance.
    Gate valves are suitable for on and off flow control.

Duyar Gate Valve

Description

The resilient seated gate valve has a plain valve base that allows free passage of sand and gravel in the valve. If dirt passes when the valve closes, the rubber surface will close around the dirt when the valve is closed. This type of gate valve is designed and functioned so that it can open and close the flow by tightly closed and fully open. We have stock of Duyar Gate Valve products with the following types.

Type

Resilient Seated Gate Valve (PN 16, F4) -  

    Gate Valve Duyar T-1437 Cast Iron
    Gate Valve Duyar T-1430 Cast Iron
    Gate Valve Duyar T-1435 Ductile Iron

Metal Seated Gate Valve (F4) -  

    Gate Valve Duyar T-1320 Cast Iron 
    Gate Valve Duyar T-1330 Ductile Iron

Resilient Seated Gate Valve (PN 16, F5) -  

    Gate Valve Duyar T-1440 Cast Iron
    Gate Valve Duyar T-1445 Ductile Iron

OS&Y Metal Seated Gate Valve (F4) -  

    Gate Valve Duyar T-1410 Cast Iron

Fitur

    Metal seated wedge gate valves are primarily designed for the flow isolation of a length of pipeline or piece of equipment. It uses a ductile iron gate that houses bronze rings to ensure a watertight seal. 
    A resilient seated gate valve has a plain valve bottom allowing free passage for sand and pebbles in the valve. If impurities pass as the valve closes, the rubber surface will close around the impurities while the valve is closed.
    OS&Y Metal Seated Gate Valves are designed with built-in safety and quality in every detail. The metal valve seat is resistant to high temperatures in the medium and will not deform during long periods of compression. This ensures stable and reliable operation over the long life span of the valve.

Powell Gate Valve

Description

The Powell gate valve features two distinct shapes, parallel and wedge shape. Parallel gate valve to control flow while gate valve wedge blocks the flow tightly. We have stock products of gate valve Powell Valves with the following types.

Type

¼" to 4" Clip Gate Valve Class 150 (Threaded Bonnet) - DOWNLOAD
2" to 24" Gate Valve (Non-Rising Stem) Class 125 - DOWNLOAD
2" to 24" Gate Valve (Rising Stem) Class 125 - 250 - DOWNLOAD
1" to 42" Gate Valve Class 150 - 1500 - DOWNLOAD
¼" to 2" Gate Valve Class 150 - 2680 - DOWNLOAD
¼" to 2" Gate Valve Class 200 (Threaded / Socket Weld End) - DOWNLOAD
¼" to 2" Gate Valve Class 200 - 600 (Threaded / Socket Weld End) - DOWNLOAD<
/a>
½" to 24" Gate Valve Class 150 - 600 - DOWNLOAD
2" to 24" Gate Valve (Flex Wedge) Class 600 - 2500 - DOWNLOAD
2" to 24" Gate Valve (Parallel Seat) Class 600 - 2500 - DOWNLOAD
¼" to 2" Gate Valve Class 200 - 600 - DOWNLOAD
½" to 6" Gate Valve Class 150 - 600 - DOWNLOAD
8" to 12" Gate Valve Class 150 - 300 - DOWNLOAD

Fitur

    Bolted or Welded Bonnet, Pressure Seal Bonnet
    Flanged, Threaded or Socket Weld Ends
    Materials: Cast carbon steel, stainless steel or alloy steel
    Cast Stainless Steel & Corrosion Resistant Alloys
    Available in all trim configurations
    Other sizes available on request
    Full Port option available for classes 150 - 1500

Zetkama Gate Valve

Description

As a zetkama distributor in Indonesia we offer various type from Zetkama Brand like Gate Valve. Zetkama Gate valves are designed to stop or start the flow of industrial liquids or gases in pipelines such as fire protection, agriculture, or sewage plants. The gate valve is not suitable for use as a control element. They must work in a fully open or closed position. We have stock products of gate valve ZETKAMA with the following types.

Type

Zetkama Gate Valve Fig.111 - DOWNLOAD
Zetkama Gate Valve Fig.112 - DOWNLOAD
Zetkama Gate Valve Fig.118 -  DOWNLOAD
Zetkama Gate Valve Fig.119 - DOWNLOAD
Zetkama Gate Valve Fig.019 - DOWNLOAD
Zetkama Gate Valve Fig.021 - DOWNLOAD

Fitur

    High tightness (leakproofness class – A according to EN – 12266 – 1)
    Face-to-face dimension: series 14 according EN 558-1, F4, F5 according to DIN 3202
    Fusion bonded epoxy coating RAL 5002  polyester coating RAL 5015 or other according to customer’s request
    Flange end connection: PN-EN-1092-2, DIN 2501 ...