Ball Valve

As the name implies, a ball valve is a flow control valve in which a hollow ball is rotated according to the desired size and direction of flow. If the orifice in the ball inside the valve is aligned straight with the tip of the valve, then there will be flow that can pass through the valve. Conversely, if the hole in the ball valve leads to the other side, it means the valve is closed and no flow occurs. In general, this ball valve is widely used because it has several advantages over other types of valves. It can withstand high pressure and temperature and is easy to maintain. Ball valve material itself can be available in several types such as PVC, iron or stainless steel. Indotama Niaga Teknik sells quality ball valve products from well-known brands that are often used by large industries. We also sell all types of valves such as ball valve, globe valve, gate valve, butterfly valve, safety valve, strainer valve, check valve, blow down valve, piston valve, plug valve, pressure reduction valve, angel valve. We sell ball valves with well-known brands such as Zetkama, Kitz, Duyar, Powell Valves, Klinger, and Asahi.

Klinger Ball Valve KHA PN 16 to PN 100

Description

As Distribuor ball valve in indonesia. PT Indotama Niaga Teknik oofer product from brand klinger , that is Klinger Ball Valve KHA PN 16 25 40 63 100. To meet the need industrial and manufactur

Type

Klinger Ball Valve KHA PN 16 to PN 100 DN 10 to DN 125

Fitur

Maintenance-free
Supports pressurization on both side
Bidirectional flow
Ball with a cylindrical full bore
Unique pre-stressed and elastic sealing system
Bidirectional sealing in accordance with EN 12266 – leakage rate A
Modular selection of system components
Serviceable without removal from the line
Antistatic design in accordance with ISO 7121 / EN 1983
Subsequent automation possible at any time (top flange in accordance with EN ISO 5211)

Genebre Wafer type ball valve mounting between flanges PN 16

Description

Indotama Niaga Teknik distributor genebre ball valve in indonesi offer produk namely Genebre Wafer type ball valve mounting between flanges PN 16

Type

Genebre Wafer type ball valve mounting between flanges PN 16

Fitur

1. Full port ball valve, Wafer type.
2. Assembly between  flanges EN 1092 PN16.
3. Made of stainless steel 1.4408 (CF8M).
4. Ball seats PTFE + 15 % FG.(please ask for other materials)
5. O’ring in the stem FKM (Viton).
6. Blow –out proof stem.
7. Direct mounting actuator acc. to ISO 5211.
8. Block System included.
9. Max. Working pressure 16 bar.
10. Working Temperature –20 ºC  + 180 ºC

Genebre Wafer Type Ball Valve flanges PN 16

Description

Indotama Niaga Teknik distributor genebre in indonesia offer product Genebre Wafer Type Ball Valve flanges PN 16. To meet the need of ball valve for industri and manufacture in indonesia

Type

Genebre Wafer Type Ball Valve flanges PN 16

Fitur

1. Full port ball valve, Wafer type.
2. Assembly with flanges DIN PN-16.  
3. Made of Carbon Steel ASTM A 105.
4. Ball seats and Gasket PTFE.
5. Max.. Working pressure 16 bar.
6. Working Temperature –20 ºC + 180 ºC.

Genebre full bore ball valve socket weld ANSI B 16 11

Description

As distributor ball valve genebre in indonesia. Indotama teknik offer product from brand genebre namely Genebre full bore ball valve socket weld ANSI B 16 11. please contact us to get best price for this product

Type

Genebre full bore ball valve socket weld ANSI B 16 11

Fitur

1. Stainless steel full port ball valve, 3 pieces.
2. Socket Weld ends according to ANSI B 16.11Std.  
3. Made of stainless steel 1.4408 (CF8M).
4. Ball seats PTFE + 15 % G.F.(please ask for other materials)
5. O’ring in the stem FKM (Viton).
6. Stem gasket PTFE + 15 % Graphite.
7. Locking system.
8. Direct mounting actuator ISO 5211.
9. Blow-out proof stem.
10. Max.Working pressure 63 bar.
11. Working Temperature –25 ºC  + 180 ºC

Genebre full bore ball valve Butt weld ansi b 16 25

Description

Indotama Niaga Teknik offer product from brand genebre like Genebre full bore ball valve Butt weld ansi b 16 25. We are distributor ball valve genebre in indonesia, to meet the need of industrial and manufacture ball valve

Type

Genebre full bore ball valve Butt weld ansi b 16 25

Fitur

1. Stainless steel full port ball valve, 3 pieces.
2. Butt Weld ends according to ANSI B 16.25 Std.  
3. Made of stainless steel 1.4408 (CF8M).
4. Ball seats PTFE + 15 % G.F.
5. O’ring in the stem FKM (Viton).
6. Stem gasket PTFE + 15 % Graphite.
7. Locking system.
8. Direct mounting actuator acc. to ISO 5211.
9. Blow-out proof stem.
10. Max. Working pressure 63 bar.
11. Working Temperature –25 ºC+ 180 ºC.

Genebre Control Ball Valve Flanges ends DIN DN 40 PN 16

Description

PT Indotama Niaga Teknik as distributor genebre in indonesia offer product from genebre like Genebre Control Ball Valve Flanges ends DIN DN 40 PN 16. To meet the need ball valve industrial and manufacture

Type

Genebre Control Ball Valve Flanges ends DIN PN 40 16

Fitur

1. Full port ball valve, 2pieces.
2. Flanges ends according DIN 2501.PN-40 DN 15 to DN 50.PN-16 DN 65 to DN 200.
3. Made of Stainless Steel DIN 1.4408 (CF8M).
4. Desing according DIN 3357 / ISO 5752.
5. Face to Face according DIN 3202 F4 / F5.
6. Ball seats PTFE + 15 % G.F.
7. Since DN 32 with spirometalic gasket..
8. Viton O’ ring stem.
9. Blow-out proof stem.
10. Direct mounting actuator according ISO 5211.
11. Block System included.
12. Anti – static device.
13. Fire-safe design.
14. Max. Working pressure 40 / 16 Kg/cm2.
15. Working Temperature –30 ºC + 180 ºC.

Genebre full bore ball valve Flanges DIN PN 40 PN 16

Description

As distributor genebre in indonesia. PT Indotama Niaga Teknik Offer product from brand zetkama like Genebre full bore ball valve Flanges DIN PN 40 PN 16. To meet the need ball valve for industrial and manufacture

Type

Genebre full bore ball valve Flanges DIN PN 40  PN 16

Fitur

1.  Full port ball valve, 2 pieces.
2. Flanged ends according to EN 1092-1.PN 40 DN 15 to DN 50.PN 16 DN 65 to DN 200.   
3. Made of Stainless Steel 1.4408 (CF8M).
4. Face to Face according to EN 558 series 27.
5. Ball seats PTFE + 15 % G.F.(please ask for other materials)
6. From DN 32 with spiral wound gasket..
7. FKM (Viton) stem O’ ring.
8. Blow-out proof stem.
9. Direct mounting actuator according to ISO 5211.
10. Block System included.
11. Anti-static device.
12. Fire-safe design.
13. Max. Working pressure 40 / 16 bar.
14. Working Temperature –30 ºC  + 180 ºC

Genebre ball valve flanges ANSI B 16 5 S 150

Description

Indotama Niaga Teknik as distributor genebre from indonesia offer product from brand genebre like Genebre ball valve flanges ANSI B 16 5 S 150 .To meet the need ball valve industrial and manufacture in indonesia

Type

Genebre ball valve flanges ANSI B 16 5 S 150

Fitur

1.  Full port ball valve, 2 pieces.
2. Flangedends according to ASME B 16.5.ANSI Class 150  
3. Made of Carbon Steel WCB.
4. Design according to ASME B 16.34.
5. Face to Face according to ASME B 16.10.
6. Ball seats PTFE + 25 % Graphite.
7. Body gasket:PTFE + Graphite (from ½” to 1 ¼”)AISI 304 + Graphite (from 1 ½” to 6”)
8.Fire-safe design (according to API607).
9. Blow-out proof stem.
10. Direct mount actuator according to ISO 5211
11.Block System included.
12. Antistatic device.
13.Inspection & Testing: API 598, API 6D. 
14. Max. Working pressure 19Kg/cm2.
15. Working Temperature –30 ºC  + 250ºC.

Genebre Ball Valve flanges DIN PN 16

Description

as a dristributor genebre in indonesia . PT Indotama Niaga Teknik offer product from brand Genebre like Genebre Ball Valve flanges DIN PN 16. To meet the need ball valve for industrial and manufacture

Type

Genebre Ball Valve flanges DIN PN 16

Fitur

1. Full port ball valve, 2 pieces.
2. Flanged endsaccording to EN 1092 PN16.
3. Made of DuctileIron EN-GJS-400 (GGG-40).
4.Face to Face according to EN 558 series 27.
5. Ball seats PTFE + 15 % FG(please ask for other materials)
6. Ball and Stem made of AISI 304.
7. O’ring in the stem FKM (Viton).
8. Blow-out proof stem.
9. Direct Mounting for actuatoracc. toISO 5211.
10. Block System.
11. Max.Working pressure 16 bar.
12. Working Temperature –30 ºC +180 ºC.

Ball Valve Klinger Ballostar KHE

Description

Ball Valve Klinger Ballostar® KHE - The Ballostar KHE ball valve offers modular selectable system components (operating stem and sealing elements). A construction kit that has already successfully proved itself at the Ballostar KHA valve. Thus the split body KHE valves is prepared for a wide range of operating conditions.

Type

Special Types KHE Ball Valves
- Metal seat for abrasive media
- Operating stem sealed by O-rings
- Operating stem extension
- Oxygen version (oil- and grease-free)
- Gas version

Fitur

-

Ball Valve Klinger Ballostar KHI

Description

As a subsidiary of the KLINGER Group, KLINGER Fluid Control has been developing, manufacturing and maintaining high-quality industrial valves at the business location Gumpoldskirchen/Austria for more than 125 years. Via the global distribution and service network, KLINGER Fluid Control offers both standardized and tailored products, services as well as solutions for customers around the globe.

Type

Ball Valve Klinger Ballostar KHI 

Fitur

-

Dungs Ball Valve

Description

The ball valve is for manual shut-off and releasing of gas. Rugged and very user-friendly design. We have stocks product of Ball Valve Dungs with the following types.

Type

Ball Valve Dungs KH 50 KH 160 - DOWNLOAD
Ball Valve Dungs KH 01/6 Series - DOWNLOAD

Fitur

    High tightness
    Compact settlement
    Environment friendly
    Rugged and very user-friendly design

Asahi Ball Valve

Description

Asahi Ball Valves is a type of manual ON / OFF valve whose flow controller is round like a ball.

Type

Asahi Ball Valve Type 21 - DOWNLOAD
Asahi Ball Valve Type 27 - DOWNLOAD
Asahi Ball Valve Type 23 - DOWNLOAD
Asahi Ball Valve Type 23H - DOWNLOAD
Asahi Ball Valve Lab Cock - DOWNLOAD
Asahi Ball Valve Water BV - DOWNLOAD

Fitur

    New Design
    Full Bore Design
    PTFE Seat
    Simple Installation on Panel Piping
    Double-O-ring
    Multi Functional Handle
    Most suitable valve for water
    Easy to Be Automated(No Modification Required)
    Compact and Economic
    Reversible Flow Direction
    Newly Equipped ISO Mounting Flange
    Interchangeable with Ball Valve Type21
    Other Special Features
    Model Horizontal
    The LAB COCK is a compact, light weight plastic valve which is highly corrosion-resistant, in durable

Duyar Ball Valve

Description

Ball Valve is a pipe system device with a flow controller that is round like a ball. On the disc, the ball has a hole right in the middle.

Type

Duyar Ball Valve  Full Bore (2 PCS PN 6) T-0510 - DOWNLOAD
Duyar Ball Valve  Full Bore (2 PCS PN 16) T-0546 - DOWNLOAD
Duyar Ball Valve  Full Bore (Threaded PN 16) T-0560 - DOWNLOAD
Duyar Ball Valve  Lug (PN 16) CDY-1030 - DOWNLOAD
Duyar Ball Valve  Full Bore (3 PCS PN 16) T-0530 - DOWNLOAD
Duyar Ball Valve  Full Bore (2 PCS PN 16)
Duyar Ball Valve  Gas (3 PCS Mop 5, HVAC 20 / PN 16 / PN 25) T-0710 - DOWNLOAD

Fitur

    High performance two-piece and three-piece ball valve for demanding process applications where fire-safe and fugitive emission compliance is mandatory.
    Lug type ball valves are most often used for installation in gas pressure control stations, gas filling stations and tank trucks.

Powell Ball Valve

Description

Powell has been producing industrial ball valves to the highest quality standards with ultra-modern manufacturing technology and astute materials sourcing. We have stock products of ball valve Powell Valves with the following types.

Type

¼" to 2” 1000 WOG Stainless Steel - DOWNLOAD
¼" to 2" 1000 WOG Carbon Steel - DOWNLOAD
¼" to 4" 1000 WOG - DOWNLOAD
¼" to 2" 2000-1500 WOG - DOWNLOAD
¼" to 4" 2000 – 1000 WOG Seal Welded * Fire Safe - DOWNLOAD
¼" to 3" 1000 WOG Direct Mount - DOWNLOAD
¼" to 2" 3600 WOG Seal Welded * Fire Safe * Threaded Ends - DOWNLOAD
¼" to 2" 3600 WOG Seal Welded * Fire Safe * Socket Weld Ends - DOWNLOAD
¼" to 2" 6000 WOG Seal Welded * Fire Safe - DOWNLOAD
¼" to 4" 250-600 WOG Brass - DOWNLOAD
¼" to 4" 1000 WOG Screwed End - DOWNLOAD
¼" to 4" 1000 WOG Socket Weld End - DOWNLOAD
¼" to 4" 1000 WOG Threaded - DOWNLOAD
¼" to 4" 1000 WOG Socket Weld - DOWNLOAD
¼” – 2” Screwed End - DOWNLOAD
¼” – 2” Socket Weld - DOWNLOAD
1” – 4” Class 150 Direct Mount * Fire Safe Fig. B501 - DOWNLOAD
6” Class 150 Mounting Pad ISO 5211 Fig. B101 - DOWNLOAD
½” – 12” Class 150 Fig. B201 - DOWNLOAD
½” – 6” Class 300 Mounting Pad ISO 5211 Fig. B203 - DOWNLOAD
½” – 10” Class 150 Direct Mount * Fire Safe Fig. B601 - DOWNLOAD
½” – 6” Class 300 Direct Mount * Fire Safe Fig. B603 - DOWNLOAD

Fitur

    Investment casting
    Blow-out proof stem
    Silicone Free
    Anti-static device
    Locking device
    API 607 Fire safe approved
    ASME B16.34 Wall thickness
    API 608 Design
    NACE MRO103
    Seal welded ends
    Direct Mounting pad ISO 5211
    Automation accessories (option)

Klinger Ball Valve

Description

Klinger is a trusted valve manufacturing company worldwide. Klinger ball valves are manufactured with high quality and reliability, long service life and easy maintenance.

Type

Ball Valve Klinger Ballostar® KHI - DOWNLOAD
Ball Valve Klinger Ballostar® KHE - DOWNLOAD
Ball Valve Klinger Ballostar® KHA - DOWNLOAD
Ball Valve Klinger Monolith® KHO - DOWNLOAD
Ball Valve Klinger Monoball® KHM - DOWNLOAD

Fitur

    2-piece ball valve
    Floating ball
    Antistatic
    Lockable
    Soft-sealing element flange sided
    Hard-sealing ring body sided
    Secondary body sealing
    Labyrinth stuffing box
    Metal seat for abrasive media
    Operating stem sealed by O-rings
    Operating stem extension
    Oxygen version (oil- and grease-free)
    Gas version

Kitz Ball Valve

Description

Kitz Ball Valve are manufactured to the highest quality and designed with the greatest safety in mind.

Type

Ball Valve Kitz Fig. 10FCTB - DOWNLOAD
Ball Valve Kitz Fig. 10STBF -10STLBF - DOWNLOAD
Ball Valve Kitz Fig. 10UT - DOWNLOAD
Ball Valve Kitz Fig. 10UTDZ - DOWNLOAD
Ball Valve Kitz Fig. 10UTDZM - DOWNLOAD
Ball Valve Kitz Fig. 20ST - 20STL - DOWNLOAD
Ball Valve Kitz Fig. 20STLB - DOWNLOAD
Ball Valve Kitz Fig. 20UTB-20UTBM - DOWNLOAD
Ball Valve Kitz Fig. 125FCTB - DOWNLOAD
Ball Valve Kitz Fig. 150SCTB - DOWNLOAD
Ball Valve Kitz Fig. 150SCTDZM - DOWNLOAD
Ball Valve Kitz Fig. 150UTBM - DOWNLOAD
Ball Valve Kitz Fig. 300SCTB - DOWNLOAD
Ball Valve Kitz Fig. 300SCTDZ - DOWNLOAD
Ball Valve Kitz Fig. 300SCTDZM - DOWNLOAD
Ball Valve Kitz Fig. 400STZ - DOWNLOAD
Ball Valve Kitz Fig. 600SCTK - DOWNLOAD
Ball Valve Kitz Fig. U3TZM - DOWNLOAD
Ball Valve Kitz Fig. UTHM - DOWNLOAD

Fitur

    Antistatic device
    Blowout-proof stem
    Fire test certication (API 607, ISO 10497)
    Double "D" stem head
    High performance HYPATITE PTFE ball seats
    Actuator mounting pad to KITZ standard
    Flexible graphite packing and gasket
    Ball and stem to CF8M (316)
    ISO 5211 top mount and CAPI stem dimension
    Swing away body for maintenance ease

Zetkama Ball Valve zBAL PN 10 PN 16

Description

As a zetkama distributor in Indonesia we offer various type from Zetkama Brand like Ball Valve. ZETKAMA ball valve is a durable construction combined with a very simple operating principle. The main component of a ball valve is a handle that is used to control the flow in a pipe through a system and inside there is a hollow ball shape.

Type

Zetkama Ball Valve Fig. 565

Fitur

-