Description

BERU ZE 14-12-600 A1 ignition electrode M14x1.25x12; A specialized ignition electrode featuring a single electrode.

Type

BERU ZE 14-12-600 A1

Fitur

Description

The Ignition Electrode BERU ZE 18-12-600 A1 is designed for reliable and efficient ignition systems.

Type

ZE 18-12-600 A1

Fitur

-

Description

Distributor BERU Ignition electrode ZE 14-8-400 A1, M14x1,25x8;Special ignition electrode with single electrode

Type

BERU Ignition electrode ZE 14-8-400 A1

Fitur

-

Description

Dungs Pressure Switch GW 50 A5 is a compact pressure switch as per EN 1854 for DUNGS multiple actuators. The pressure switches are suitable for switching a circuit on, off or over on changes in actual pressure relative to the set switching point (reference value).

Type

Dungs Pressure Switch GW 50 A5

Fitur

-

Description

SQN 31.401 Electromotoric actuators for use with air dampers and control valves of oil or gas burners of small to medium capacity.

Type

SQN 30.102A2700
SQN 30.111A2700
SQN 30.111A1700
SQN 30.111A3500
SQN 30.121A2700
SQN 30.121A1700
SQN 30.121A3500
SQN 30.131A2700
SQN 30.131A1700
SQN 30.151A2700

Fitur

The SQN3... / SQN4... actuators are designed to drive gas and air dampers on small to 
medium-capacity oil or gas burners or for the load-dependent control of fuel and 
combustion air volume: 
- In connection with P-PI or PID controllers, such as the RWF... 
- Directly via the different types of burner controls, such as LOA..., LMO..., LMG... or 
LFL... 
- In connection with 1- or 2-wire control or 3-position controllers 
 All types of actuators 
with: 
- Impact-proof and heat-resistant plastic housing 
- Screw terminals for the electrical connections 
- Maintenance-free gear train, which can be disengaged 
- Internal and external position indication 
- Easy-to-adjust end and auxiliary switches for setting the switching points 
 Holding torque: - SQN3... 
- SQN4... 
0.8...3 Nm 
6 Nm 
 Running time: - SQN3... 
- SQN4... 
4.5...30 s 
120 s 
 Direction of rotation: - SQN30... 
- SQN31... / SQN41... 
counterclockwise 
clockwise 

Description

Siemens LFL 1.333 LFL 1322, Burner controls For gas, oil or dual-fuel forced draft burners of medium to high capacity For multistage or modulating burners in intermittent operation With checked air damper control Flame supervision – with UV detectors QRA2 / QRA4 / QRA10 – and ionization probe The LFL1... and this Data Sheet are intended for use by OEMs which integrate the burner controls in their products!

Type

Siemens Burner Control LFL 1333 LFL 1322

Fitur

 Control and supervision of forced draft burners of direct spark flame or interrupted 
pilot construction 
 For medium to high capacity 
 For intermittent operation (at least one controlled shutdown every 24 hours) 
 For universal use with multistage or modulating burners 
 For use with stationary air heaters (WLE) 
 For use with dual-fuel burners 
 Type-tested and approved in accordance with DIN EN 298 

Description

As distributor UV detector in indonesia PT Indotama Niaga Teknik Offer produk from brand siemens that is Siemens UV Detector QRA5 QRA7 , to meet the need industrial and manufactur

Type

Siemens UV Detector QRA5 QRA7

Fitur

-

Description

PT Indotama Niaga Teknik as distributor danfoss in indonesia Offer product from brand Danfoss namely Danfoss Electronic Oil Burner Control OBC 82 10 to meet the need industrial and manufactur

Type

Danfoss Electronic Oil Burner Control OBC 82 10

Fitur

• For 2 stage burners up to 30 kg/h
• For burners with or without preheater
• Precise and reproducible timings
• Limitation at 3 restarts by flame failure within
the same operating period
• Limitation of 10 min. on preheating time
• Remote alarm output
• Indication of reason for lockout
• Indication of preheating and operation

Description

PT Indotama Niaga Teknik as distributor danfoss in indonesia offer product from brand danfoss like Danfoss Ignition Units EBI4 Series to meet the need industrial and manufacture in indonesia. Please Contact our sales via email or phone to get best price

Type

Danfoss Ignition Units EBI4 Series

Fitur

• 1- or 2-pole ignition• Low power consumption due to high efficiency (new technology)
• Complies with the RoHs and WEEE directives
• EMC according to EN 55014-1 and EN 55014-2
• Earth connection through the primary cable
• Same dimensions and flexible mounting as the well-known EBI series

Description

Dungs FRN Zero Pressure Regulator DN 40 to DN 100. Indotama Niaga Teknik as distributor Dungs offer various type of gas pressure regulator like Dungs FRN Zero Pressure Regulator. We are ready to meet the need of sparepart burner for industrial and manufacture.

Type

FRN 515
FRN 520
FRN 5040
FRN 5050
FRN 5065
FRN 5080
FRN 5100

Fitur

-

Description

Indotama Niaga Teknik offers products from suntec, namely the suntec oil pump type AT3 gear size 45 55 65, as a distributor of burner spare parts in Indonesia we offer a variety of industrial and manufacturing needs

Type

AT3 gear size 45 55 65

Fitur

-

Description

Indotama Niaga Teknik offers products from suntec, namely the suntec oil pump type AN 77A 7255, as a distributor of burner spare parts in Indonesia we offer a variety of industrial and manufacturing needs

Type

Suntec Oil Pump AN 77A 7255
Suntec Burner Pumps
Suntec Oil Pump AS47A
Suntec Oil Pump AS47C
Suntec Oil Pump D57A
Suntec Oil Pump D57C
Suntec Oil Pump E4NC 1069
Suntec Oil Pump E4NA 1069
Suntec Oil Pump AJ 6CC
Suntec Oil Pump AT2 47C
Suntec Oil Pump AL 65C
Suntec Oil Pump AL 65B
Suntec Oil Pump AS 67 C
Suntec Oil Pump AS 67 A
Suntec Oil Pump AN 77 A
Suntec Oil Pump AE 67 C
Suntec Oil Pump AE 97 E
Suntec Oil Pump AL 65 C
Suntec Oil Pump AL 95 C
Suntec Oil Pump J 6 CC
Suntec Oil Pump. E 6 NA
Suntec Oil Pump E 6 NC

 

Suntec 2 Stage Pumps

Suntec Oil Pump AT2 45A
Suntec Oil Pump AT2 45C
Suntec Oil Pump AT3 45A
Suntec Oil Pump AT3 45C

Fitur

-

Description

Dungs Pressure regulator FRU Circulation regulator DN 40 DN 100. As a distributor of burner spare parts in Indonesia, Indotama Niaga Teknik offers products from the Dungs brand, namely the Pressure regulator FRU Circulation regulator DN 40 - DN 100. By prioritizing quality and service, Indotama Niaga Teknik is ready to meet the needs of spare parts in industry and manufacturing.

Type

Pressure regulator FRU Circulation regulator DN 40  DN 100

Fitur

-

Description

Dungs FRNG Pressure Regulator DN 40 DN 50. As a distributor of burner spare parts in Indonesia, Indotama Niaga Teknik offers products from the Dungs brand, namely the FRNG Zero or Proportional Pressure Regulator DN 40 DN 50. By prioritizing quality and service, Indotama Niaga Teknik is ready to meet the needs of spare parts in industry and manufacturing.

Type

FRNG Pressure Regulator DN 40 DN 50

Fitur

-

Description

Dungs FRM NOC Medium Pressure Regulator. As a distributor of burner spare parts in Indonesia, Indotama Niaga Teknik offers products from Dungs brand, namely the FRM NOC Medium Pressure Regulator. By prioritizing quality and service, Indotama Niaga Teknik is ready to meet the needs of spare parts in industry and manufacturing.

Type

Medium Pressure Controller FRM-NOC

Fitur

-

Description

Dungs FRM Medium Pressure Regulator DN 65 DN 80. Indotama Niaga Teknik offers products from the Dungs brand, namely FRM Medium Pressure Regulator DN 65 DN 80, as a distributor of burner spare parts in Indonesia, we offer products from the Dungs brand to meet the needs of industrial and manufacturing spare parts. You can contact us to get the best offers and prices from us.

Type

FRM Medium Pressure Regulator DN 65 DN 80

Fitur

-

Description

Dungs FRM Medium Pressure Regulator DN 25 DN 50. Indotama Niaga Teknik offers products from the Dungs brand, namely FRM Medium Pressure Regulator DN 25 DN 50, as a distributor of burner spare parts in Indonesia, we offer products from the Dungs brand to meet the needs of industrial and manufacturing spare parts. You can contact us to get the best offers and prices from us

Type

FRM Medium Pressure Regulator DN 25 DN 50

Fitur

-

Description

The SUNTEC TA oil pump is specially designed for industrial heating applications using light or heavy oils. It is fitted with a preheater location to render cold starting easier.

Type

- OIL PUMP TYPE TA
GEAR SIZES 2
- OIL PUMP TYPE TA
GEAR SIZES 3
- OIL PUMP TYPE TA
GEAR SIZES 4
- OIL PUMP TYPE TA
GEAR SIZES 5

Fitur

-

Description

The gear set draws oil from the tank through the built-in filter and transfers it to the valve that regulates the oil pressure to the nozzle line. All oil which does not go through the nozzle line will be by-passed through the valve back to the return line, in a two pipe installation or, if it is a one-pipe installation, back to the suction port in the gear-set. In that case the by-pass plug must be removed from the return port and the return port sealed by steel plug and washer.

Type

- AE GEAR SIZES 47
- AE GEAR SIZES 57
- AE GEAR SIZES 67
- AE GEAR SIZES 77
- AE GEAR SIZES 97

Fitur

-

Description

Sparepart Burner Dungs Pressure Regulator for DMV. The FRI/6 balancing type pressure regulator combines a pressure regulator and a 50 micron gas filter in one housing. Various combinations are possible using the FRI/6 with the most of the DMV shutoff valves for a compact modular system.

Type

FRI 705/6 -FRI 707/6 
FRI 710/6 -FRI 712/6 

Fitur

-

Description

Sparepart Burner Dungs Ratio Regulator and Zero Governor. The FRG ratio regulator/zero governor has an adjustable setpoint spring and non adjustable counterspring. - Distributor Dungs, distributor gas regulator valve.

Type

FRG 705/6 
FRG 707/6 
FRG 710/6 
FRG 712/6 
FRG 715/6
FRG 720/6
FRG 725/6 

Fitur

-

Description

Distributor dungs - Distributor solenoid valve - .The DUNGS safety solenoid valve MV/4, MVD, MVD/5, MVDLE/5 is a single-stage automatic shut-off valve as per EN 161 for gas burners and gas appliance.

Type

MV/4, MV/5 Single-stage solenoid valve, normally when closed, fast opening, fast closing.

MVD/5 Single-stage solenoid valve, normally when closed, fast opening, fast closing, manual limitation of
flowing gas volume by adjusting main volume.

MVDLE/5 One-stage solenoid valve, normally when closed, slow opening, fast closing. Opening time adjustment with fast stroke range. Main volume adjustment.

Fitur

-

Description

Italpump Gas Filters serves to prevent the passage of dust or dirt particles carried by the gas, protect regulatory devices and for safety. This gas filter has a large filtering component, can be removed for inspection and can be washed/cleaned. We have stocks product of Italpump Gas Filters with the following types.

Type

Gas Filter Italpump type IF
Gas Filter Italpump type IFR0
Gas Filter Italpump type IFR1-2
Gas Filter Italpump type IFR3-5

Fitur

   EC certified according to EN 126
    In conformity with the 2009/142/EC Directive (Gas Directive)
    In conformity with the 97/23/EC Directive (PED Directive)
    In conformity with the 94/9/EC Directive (ATEX Directive)

Description

Italpump Gas Pressure Regulators is a tool for adjusting the pressure of gas and air outlets using a regulation screw as a pressure regulating device. This tool is equipped with several safety devices, a compact design, and is reliable and suitable for use in household and industrial installations.

Type

    Italpump Gas Regulator type IR0
    Italpump Gas Regulator type IR1-2
    Italpump Gas Regulator type IR3-5
    Italpump Gas Regulator type IR5 32-100
    Italpump Gas Regulator type IRZ 

Fitur

   EC certifi ed according to EN 88-2
    In conformity with the 2009/142/EC Directive (Gas Directive)
    In conformity with the 94/9/EC Directive (ATEX Directive)
    In conformity with the 97/23/EC Directive (PED Directive)

Description

Italpump Solenoid Valves is a valve that is controlled by an AC or DC electric current through the coil. The principle of function of this solenoid valve is very simple and very safe. Equipped with adjustable flow regulator and slow opening kit.

Type

Solenoid Valve Italpump type IE
Solenoid Valve Italpump type IEL1-3-6
Solenoid Valve Italpump type IEL03
Solenoid Valve Italpump type IENA

Fitur

    EC certifi ed according to EN 161
    In conformity with the 2009/142/EC Directive (Gas Directive)
    In conformity with the 94/9/EC Directive (ATEX Directive)
    In conformity with the 2004/108/EC Directive (Electromagnetic Compatibility)
    In conformity with the 2006/95/EC Directive (Low Voltage)
    6 bar versions in conformity with the 97/23/EC Directive (PED Directive)

Description

Anello Gas Pressure Regulators is a tool for adjusting the gas outlet pressure suitable for the installation of automatic gas burner systems and for industrial distribution systems. It has a safety diaphragm that is incorporated to ensure that in the event of a breakdown of the operating diaphragm, no gas leakage is possible.

Type

    Gas Pressure Regulator Anello type FG1B
    Gas Pressure Regulator Anello type FS1B
    Gas Pressure Regulator Anello type ST4B

Fitur

    The gas governors are in accordance with UNI EN88-2 specification (2009/142/CE gas regulation).
    The governors are suitable to systems installation with automatic gas burners including mixed and combined systems and to in industrial distribution systems.

Description

Anello Gas Filters serves to prevent the entry of dust or dirt particles carried by gas and air. These gas filters are produced with high quality so that they can be operationalized over a long period of time.

Type

Anello Gas filter 70600 Series

    Anello Gas filter type 70609 Rp 1/2"
    Anello Gas filter type 70608 Rp 3/4"

Anello Gas filter 70600/1B Series

    Anello Gas filter type 70611/1B Rp 1/2"
    Anello Gas filter type 70612/1B Rp 3/4"
    Anello Gas filter type 70602/1B Rp 1"
    Anello Gas filter type 70604/1B Rp 1"1/4
    Anello Gas filter type 70603/1B Rp 1"1/2
    Anello Gas filter type 70631/1B Rp 2"
    Anello Gas filter type 70603F/6B DN 40
    Anello Gas filter type 70631F/6B DN 50
    Anello Gas filter type 70610F/6B DN 65
    Anello Gas filter type 70620F/6B DN 80
    Anello Gas filter type 70640F/6B DN 100
    Anello Gas filter type 70650F/6B DN 125
    Anello Gas filter type 70660F/6B DN 150

Anello Gas filter 70600/6B Series 

    Anello Gas filter type 70611/6B Rp 1/2"
    Anello Gas filter type 70612/6B Rp 3/4"
    Anello Gas filter type 70602/6B Rp 1"
    Anello Gas filter type 70604/6B Rp 1"1/4
    Anello Gas filter type 70603/6B Rp 1"1/2
    Anello Gas filter type 70631/6B Rp 2" 

Anello Gas filter 70680 Series

    Anello Gas filter type 70684 Rp 1"
    Anello Gas filter type 70685 Rp 1.1/4"
    Anello Gas filter type 70686 Rp 1.1/2"
    Anello Gas filter type 70687 Rp 2"

Fitur

-

Description

Distributor Anello Anti Vibration Joint - Anello Anti Vibration Joint is a connection tool that functions as a vibration damper in the gas fuel line. It is manufactured to standard-compliant specifications (DIN & ISO) and has been certified under the Pressure Equipment Directive (PED). We have stocks product of Anello Anti Vibration Joint with the following types

Type

Anello Anti Vibration Joint  type GA
Anello Anti Vibration Joint  type GAF

Fitur

-

Description

Distributor Anello Solenoid Valves - Anello Solenoid Valves is a valve that is controlled by AC or DC electric current through the coil with manual reset. Equipped with IP 65 protection and suitable for gas & air.

Type

    Anello Gas Solenoid Valve type N.O. MSV12/6B
    Anello Gas Solenoid Valve type N.O.  MSV34/6B
    Anello Gas Solenoid Valve type N.O. MSV100/6B
    Anello Gas Solenoid Valve type N.O. MSV112/6B
    Anello Gas Solenoid Valve type N.O. MSV114/6B
    Anello Gas Solenoid Valve type N.O. MSV200/6B
    Anello Gas Solenoid Valve type N.O. MSV212/6B
    Anello Gas Solenoid Valve type N.O. MSV300/6B
    Anello Gas Solenoid Valve type N.O. MSV400/6B
    Anello Gas Solenoid Valve type N.O. MSV500/6B
    Anello Gas Solenoid Valve type N.O. MSV600/6B
    Anello Gas Solenoid Valve type N.O. MSV800/6B
    Anello Gas Solenoid Valve type N.O. MSV1200/6B

Fitur

-

Description

The servo pressure regulator permits optimal mixture formation in forced air burners and premix burners in combination with mechanical or electronic gas/air regulation units. This applies to modulating and multistage variable operating modes. We have stocks product of Gas Multi Block Dungs with the following types.

Type

Dungs GasMultiBloc MBC

    This MB GasMultiBloc MBC integrates a filter, servo pressure regulator, two class A valves and a pressure switch in one compact unit. They represent the newest and most modern series of Dungs gas blocks.
    The modular system provides individual solutions in gas safety and control systems
    MBC-65 and MBC-120 models are used for one-stage mode burners. In MBC-...-SE models the servo pressure regulator permits optimal mixture formation in forced air burners and premix burners in conjunction with mechanical or electronic integrated gas-air regulation units; it applies to modulating and multi-stage operating mode.
    The two valves are fast opening and fast closing, the dirt trap is different according to the type (see table below).
    Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
    Reference value spring is installed permanently, no spring replacement possible for MBC-65 and MBC-120. Bigger models have different type of springs for different pressure ranges. They can also be equipped with versions for zero pressure and gas-air ratio control .
    Optional external pulse for MBC-1900 - 5000.
    High flow valves at low pressure difference.
    Simple mounting, compact, light-weight.
    MBC-...-SE can also be used to replace the old double solenoid gas valves DMV-SE and MBC-...-VEF replaces DMV-VEF.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Dungs GasMultiBloc MB-DLE - Single Stage Operation

    This GasMultiBloc MB-DLE integrates a filter, pressure regulator, two class A valves, a bypass valve (B07) and pressure switches in one compact fitting.
    The modular system permits individual solutions by using external ignition gas tap in connection with separately controlled valves, by adding a valve proving system, min/max pressure switches, pressure limiters, partial volume setting by closing stroke limiter at valve V2 and regulator blocking for liquid gas applications.
    Maximum operating pressure is 360 mbar (200 mbar for MB-DLE 403), ambient temperature -15÷70ºC (only above 0 for LPG), degree of protection IP 54.
    The two valves are controlled in common or separated, depending on the model; both are fast closing. V1 is with fast-opening and V2 with slow-opening
    Main volume restrictor at valve V2.
    MB-DLE B07 series has an additional bypass valve with fast opening.
    Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
    The pressure regulator has a setpoint spring permanently installed, no exchange possible. A vent line above roof is not required.
    MB-DLE 403-412 models have a fine mesh sieve, replacement only possible by dismounting the fitting. MB-DLE 415 and 420 have a pre-mount filter that can be changed without removing the valve.
    Simple mounting, compact, light-weight.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Dungs GasMultiBloc MB-ZRDLE (MB-ZR) - Two Stage Operation

    This MB GasMultiBloc MB-ZRDLE integrates a filter, pressure regulator, two class A valves, a bypass valve (B07) and pressure switches in one compact fitting.
    The modular system permits individual solutions by using external ignition gas tap in connection with separately controlled valves, by adding a valve proving system, min/max pressure switches, pressure limiters, limit switch and closing stroke limiter at valve V2, regulator blocking for liquid gas applications.
    Maximum operating pressure is 360 mbar, ambient temperature -15÷70ºC (only above 0 for LPG), degree of protection IP 54.
    The two valves are controlled in common or separated, depending on the model; both are fast closing. V1 is with fast-opening and V2 with fast or slow-opening
    Main volume restrictor and partial volume restrictor at valve V2.
    MB-ZRDLE B07 series has an additional bypass valve with one stage and fast opening.
    Different pressure switch types mountable: GW A5, NB A2, UB A2. Standard equipped with GW 150 A5.
    The pressure regulator has a setpoint spring permanently installed, no exchange possible. A vent line above roof is not required.
    MB-ZRDLE 405-412 models have a fine mesh sieve, replacement only possible by dismounting the fitting. MB-ZRDLE 415 and 420 have a pre-mount filter that can be changed without removing the valve.
    Simple mounting, compact, light-weight.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Dungs GasMultiBloc MB-VEF

    This GasMultiBloc MB-VEF integrates a filter, gas/air ratio controls, two class A valves and a pressure switch.
    The gas/air ratio control ensures optimal mixture formation in forced air burners and pre-mix burners; this applies to floating and two-step floating operations.
    Maximum operating pressure is 360 mbar, output pressure range 0.5÷100 mbar, ambient temperature -15÷70ºC.
    Ratio V = pburner/pblower, air 0.75:1 up to 3:1.
    Zero point adjustment N.
    Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
    External pulse lines, pulse flange.
    The modular kit ensures individual solutions comprising valve proving system, min/max pressure switches and pressure limiters.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Fitur

    Ease of installation
    Suitable for high pressure applications
    Longer service life
    Efficient regulation operation  
    We have following Items in our stock.
    Burner Management Systems Automatic Burner Controls
    Pressure regulators Pressure switches for gas and air
    Solenoid valves
    Double solenoid valves Multi Block.
    Gas Multi Block Multifunctional gas controls
    Valve proving systems Line leakage testers Laboratory
    System engineering Gas trains
    Ball valve Filters
    Motor butterfly valves & Actuators
    Accessories

Description

DUNGS DMV integrates two solenoid valves in one compact fitting. Double solenoid valves are used where two single valve were mounted previously. We have stocks product of Double Solenoid Valve Dungs with the following types.

Type

    Dungs Double Solenoid Valve DMV 5 -  
    Dungs Double Solenoid Valve DMV 11 eco -  
    Dungs Double Solenoid Valve DMV 12 -  
    Dungs Double Solenoid Valve DMV 525 -  
    Dungs Double Solenoid Valve DMV 602 -  
    Dungs Double Solenoid Valve DMV 604L NEMA 4x -  
    Dungs Double Solenoid Valve DMV 622 & POC -  
    Dungs Double Solenoid Valve DMV 624L NEMA 4 & POC -  
    Dungs Double Solenoid Valve DMV 704 NEMA 4 & POC -  
    Dungs Double Solenoid Valve DMV 704 NEMA 4 -  
    Dungs Double Solenoid Valve DMV 50050 -  
    Dungs Double Solenoid Valve DMV eco 6xx -  
    Dungs Double Solenoid Valve DMV ZR 602 -  
    Dungs Double Solenoid Valve DMV ZR 612 & POC -  
    Dungs Double Solenoid Valve DMV-D(LE) 11 -  
    Dungs Double Solenoid Valve DMV-D11 -  
    Dungs Double Solenoid Valve DMV-SE 507-525 11 -  
    Dungs Double Solenoid Valve DMV-VEF 507-525 -  
    Dungs Double Solenoid Valve Vent Line Adapter DMV 7xx -  
    Dungs Double Solenoid Valve DMV & Vent Line Adapter -  

Fitur

    Low power consumption
    Low weight
    Compact design
    High flow rates
    Max. operating pressure 500 mbar (50 kPa), 5000 mbar (5 bar, 500 kPa)
    Fast closing
    Fast opening
    Automatic shut-off valves as per DIN EN 161 Class A Group 2
    Two A valves in one housing
    Double seat valves
    Mountable closed position signal contact
    DC solenoid
    CSA Certified
    EU Gas Appliance Regulation EN161
    DUNGS is an ISO 9001 manufacturing facility

Description

Kromschroder Photocell has a sensor called UV. The task of the UV sensor is to detect ultraviolet light from the flame and then connect it to the burner control. UV sensors will not respond to daylight, incandescent lamps or infrared radiation.

Type

Kromschroder Photocell type UVS 5
Kromschroder Photocell type UVS 10

Fitur

Virtually immune to interference due to its insensitivity to daylight, infrared radiation and incandescent bulbs
Maximum safety thanks to protection against discontinuity or short-circuit on the flame signal cable
Suits industrial needs due to robust design
Complies with the requirements of EN 298 in conjunction with Kromschröder automatic burner control units and burner control units

Description

Distributor Beru Special Ignition Electrodes - This part also suitable for special applications sucs as level and temperature monitoring

Type

ZE special spark plugs with single electrodes
ZK special spark plugs with earth electrodes
ZK 18-12 special spark plugs with safety tubes

Fitur

- 

Description

Distributor burner control - Burner Controls is a high quality burner control and automatic monitoring device. As we know, Siemens is a large company with many years of experience. Siemens burner controls are the perfect solution for the needs of the burner industry. We have stocks product of Siemens Burner Controls with the following types.

Type

    Siemens Burner Control type LAL
    Siemens Burner Control type LDU
    Siemens Burner Control type LEC1
    Siemens Burner Control type LFE10
    Siemens Burner Control type LFL1
    Siemens Burner Control type LGB
    Siemens Burner Control type LME
    Siemens Burner Control type LME71
    Siemens Burner Control type LME73
    Siemens Burner Control type LME75-76
    Siemens Burner Control type LMO
    Siemens Burner Control type LMV5
    Siemens Burner Control type LMV36
    Siemens Burner Control type LMV37
    Siemens Burner Control type LOA
    Siemens Burner Control type LOK
    Siemens Temperature-Pressure Controller RWF5

Fitur

-

Description

Distributor flame sensor - Siemens flame sensor or photocells are detector devices designed to be connected to burner controls and for monitoring of flame, gas and oil. This flame sensor are also equipped with a UV sensor. We have stocks product of Siemens flame sensors/photocells with the following types.

Type

    Siemens Flame Sensor QRA Series
    Siemens Flame Sensor QRB Series
    Siemens Flame Sensor QRB Series
    Siemens Flame Sensor QRI Series
    Siemens Flame Sensor RAR Series

Fitur

-

Description

Suntec Oil Pumps are specially designed for industrial heating applications that use light or heavy oils with low, medium and high capacities. These oil pumps are designed with a very fast response. We have stocks product of Suntec Oil Pumps with the following type.

Type

Types low :

    Oil Pump Suntec A2L
    Oil Pump Suntec A-3000
    Oil Pump Suntec AE
    Oil Pump Suntec AL
    Oil Pump Suntec AM
    Oil Pump Suntec AS
    Oil Pump Suntec ATUV
    Oil Pump Suntec AUV
    Oil Pump Suntec OT2

Types Medium :

    Oil Pump Suntec AJ
    Oil Pump Suntec B-4000
    Oil Pump Suntec E1001
    Oil Pump Suntec E1069

Types High :

    Oil Pump Suntec T
    Oil Pump Suntec TA
    Oil Pump Suntec TAR
    Oil Pump Suntec TV

Fitur

-

Description

Distributor Oil Pump - Danfoss Oil Pump is manufactured with diamond-carbon coil technology that provides exceptional toughness, durability and strength thanks to a combination of diamond and carbon lubrication. With this technology, the service life of this oil pump is 10 times longer even in critical applications. We have stocks product of Danfoss Oil Pump with the following types.

Type

Danfoss Oil Pump BFP 10T/11T sizes 8 and 12

Fitur

    10 times longer lifetime in critical applications e.g. in heavy loaded conditions
    Equipped with extra durable Diamond Coil
    Double warranty...etc

Description

Siemens Servo Motor is an electromotoric actuators for use with air dampers and control valves of oil or gas burners of small to medium capacity. We have stocks product of Siemens Servo Motor with the following types.

Type

    Siemens Servo Motor SQM 10.15562
    Siemens Servo Motor SQM 10.16502
    Siemens Servo Motor SQM 10.16562
    Siemens Servo Motor SQN 30.111 A 3500
    Siemens Servo Motor SQN 31. 151 A 2766
    Siemens Servo Motor SQN 90.220A2790
    Siemens Servo Motor SQN 90.570A2793
    Siemens Servo Motor SQN 91.140B2790
    Siemens Servo Motor SQN 91.140B2799

Fitur

    Impact-proof and heat-resistant plastic housing
    Screw terminals for the electrical connections
    Maintenance-free gear train, which can be disengaged...etc

Description

Kromschroder burner control IFS 110 IM is an automatic burner control unit suitable for the ignition and control of the combustion gases of all types of gas firing installations. This burner control is designed for high frequencies and is made of impact-resistant plastic material for maximum long-term operation.

Type

Kromschroder Burner Control Automatic IFS 110 IM

Fitur

Flame control by means of flame rod or UV-detector
Flame simulation check before starting and after switching the burner off
Suitable for ignition and ionisation control with one electrode
Modern technique using semiconductors
High cycling frequency
Remote reset
External fault indication
FM approved
Kromschröder is a company certified to ISO 9001