This is a general specification leaflet; for specific applications not covered herein, contact Suntec.
The SUNTEC AE oil pump is the basic model incorporating a pressure regulating valve. It does not have a cut-off feature, this allows purging of air through the nozzle line.
APPLICATIONS
PUMP OPERATING PRINCIPLE
The gear set draws oil from the tank through the built-in filter and transfers it to the valve that regulates the oil pressure to the nozzle line. All oil which does not go through the nozzle line will be by-passed through the valve back to the return line, in a two pipe installation or, if it is a one-pipe installation, back to the suction port in the gear-set. In that case the by-pass plug must be removed from the return port and the return port sealed by steel plug and washer.
- AE GEAR SIZES 47 - AE GEAR SIZES 57 - AE GEAR SIZES 67 - AE GEAR SIZES 77 - AE GEAR SIZES 97
-
Other product from brand
sparepart burner Suntec Oil Pumps
Suntec Oil Pump AN 77A 7255
Suntec oil pump type AT3 gear size 45 55 65
Sparepart Burner Suntec OIL PUMP TYPE TA
Sparepart Burner Suntec OIL PUMP TYPE AE GEAR
Related Products
sparepart burner Italpump Gas Filters
Dungs FRN Zero Pressure Regulator DN 40 to DN 100
Sparepart Burner Dungs Pressure Regulator for DMV
Danfoss Ignition Units EBI4 Series
sparepart burner Italpump Gas Pressure Regulators
BERU Ignition electrode ZE 14 8 400 A1
sparepart burner Anello Gas Pressure Regulators
sparepart burner Kromschroder Photocell
Suntec Oil Pump AN 77A 7255
Sparepart Burner Suntec OIL PUMP TYPE TA
Siemens Burner Control LFL 1333 LFL 1322
sparepart burner Dungs Double Solenoid Valve
Siemens Electro Motoric Actuator SQN 31.401
sparepart burner Anello Anti Vibration Joint
Dungs Pressure regulator FRU Circulation regulator DN 40 DN 100
sparepart burner Dungs GRMS
sparepart burner Danfoss Oil Pump
Beru Ignition electrode ZE 14 12 600 A1
Suntec oil pump type AT3 gear size 45 55 65
sparepart burner Siemens Servo Motor