Tival (Fanal) Pressure Switch FF 4 4 DAH

Tival (Fanal) Pressure Switch FF 4 4 DAH has so modern design and components. This product has a function for the pressure monitored at the media port is dependent on the pressure range operated via a spring and lever system on the cascade switch as well as on the flat membrane.

The compressor or pump can start if there is no pressure on the closed 1-2 contact membrane. Meanwhile, the pump or compressor will be turned off if contacts 1-2 are open and contacts 1-4 are closed if the set upper transition point is reached. Contact 1-2 will only be restored when the pressure on the membrane has dropped to its lower switching point. The switching point can be adjusted manually with a screwdriver.

For the detailed specification of Tival (Fanal) Pressure Switch FF 4 4 DAH can be seen below:

Spesification:

• Lower Switchpoint: 0.07 to 3.75 bar
• Upper Switchpoint: 0.22 to 4 bar
• Standard Setting: 1/3 bar
• Smallest difference lower upper/ lower end of range: 0.15/0.25 bar
• Maximum Test Pressure: 40 bar
• Maximum Operating Pressure: 24 bar
• Ambient Temperature: -20 to 70°C
• Connection: G 3/8" 

Application:

Tival (Fanal) Pressure Switch FF 4 4 DAH is can be used in oils, water and gases media. This product can be applied in wide range of applications in industry and commerce. 

Pressure Switch FF 4 4 DAH

- Can be applied for oils, water and air
- Has perbunan diaphragm 
- Connection G 3/8"