Sensus MeiStream water meter DN 40 up to DN 300

• Measurement for billing of cold potable water up to 50 °C
• Measurement of high flow rates (e.g., in pumped pipes)
• Measurement of low flow (e.g., in light load periods)
• Leakage control
• Sizes from DN 40 up to DN 300

Main characteristics

• Meter with MID pattern approval acc. to annex MI001
• Exchangeable metrological unit with MID pattern approval acc. to annex MI001
• Unique measuring range; Q3/Q1 ≥ 100
• High overload capability
• No straight inlet length necessary (U0D0 acc. to OIML R49:2013 and ISO 4064-1:2017)
• Drinking water approved acc. to AS4020
• Installation position horizontal and vertical
• Meter body in short (WP) and long (WS) overall length acc. to DIN 19625 and ISO 4064-1:2017 available
• Meter can be submerged; protection class IP68
• Used materials are temperature resistant up to 70 °C
• Register prepared for HRI-Mei pick-up
• Use of optical pulsers type OD is still possible

Available options

• Encoder register with different data protocols (M-Bus, Sensus, IEC 1107)
• BMF version free of copper alloy for aggressive water
• Register with 7 digits without multiplier (DN 150 ... 300)
• Version for high pressure up to PN 40 (DN 50 ... 150)
• Version for use in hazardous areas
• HRI-Mei factory mounted
• ¼" pressure monitoring port

Materials

• Body Cast iron (PN16) Ductile iron (PN40)
• Metrological module Engineering polymer
• Rotor Engineering polymer
• We also use the following materials Brass Stainless steel 

Sensus MeiStream water meter DN 40 up to DN 300

-