Sauter Pressure Switch DFC 17B 27B

Sauter Pressure Switch DFC 17B 27B
Get Best Offer
As distributor pressure switch in indonesia. PT Indonesia Niaga Teknik offer product from brand sauter that is Sauter Pressure Switch DFC 17B 27B, to meet the need industrial and manufacture
Brand :

Sauter

Category :

Pressure Measurement

Share :

Distributor Sauter Pressure Switch DFC 17B 27B

Sauter Pressure Switch DFC 17B 27B

Description of operation

When the pressure exceeds the upper change-over point (which is set in the scale on the right), the contacts switch from 1-2 to 1-3. When the pressure falls below the lower change-over point (which is set in the scale on the left), the contacts switch from 1-3 to 1-2. The vibration-proof snap-action switch has a pre-loaded spring that only activates the change-over mechanism when the change-over point has been reached. As a result, the contact force is maintained up to the change-over point even when the switch is activated very slowly.

Materials

Materials that come into contact with the medium: Pressure sensor made of brass (DFC 17): brass, stainless steel, nitrile rubber. Pressure sensor made of stainless steel (DFC 27): stainless steel, material no. 1.4104 and 1.4541

  • Maximum load with gold-plated contacts1) 200 mA, 50 V
  • Minimum load with gold-plated contacts 1 mA, 6 V
  • Maximum load with silver-plated contacts2) 10(2) A, 400 V~ (25 W), 250 V
  • Minimum load with silver-plated contacts 100 mA, 24 V

Type

Sauter Pressure Switch DFC 17B 27B

Fitur

• For regulating and monitoring pressure in liquids, gases and vapours
• Especially suitable for installations subject to vibrations
• Contact rating 1 mA/6 V to 10 A/400 V
• Gold-plated silver contacts, vibration-proof snap-action switch with single-pole change-over switch
• Upper and lower switching points can be set independently of each other
• Sealable
• Splashproof
• DFC17B**F001: Pressure sensor made of brass for non-aggressive media
• DFC27B**F002: Pressure sensor made of stainless steel for aggressive media