RTK Control Valve MV5351 PN 16 to PN 100 DN 40 to DN 150

As distributor control valve RTK di indonesia, PT Indotama Niaga Teknik Offer product from brand RTK like RTK Control Valve MV5351 PN 16 to PN 100 DN 40 to DN 150. To meet the need industrial and manufacture
Brand :

RTK

Category :

Control Valve

Share :

Distributor RTK Control Valve MV5351 PN 16 to PN 100 DN 40 to DN 150

RTK Control Valve MV5351 PN 16 to PN 100 DN 40 to DN 150

Function

The steam pressure is reduced by a low noise perforated cone. The water is injected into the perforated cone from below and, depending on the valve stroke, the perforated cone blocks the outlet holes of the water injection pipe. This way the injected water is atomised effectively and independent of load. An injection nozzle is used instead of the injection pipe when the water flow is very low (kv = value of water atomisation under 0.45) and the seat diameter is less than 50 mm. The water has already completely evaporated and the steam has been cooled accordingly several metersbeyond the steam-converting valve. Several electric and pneumatic actuators are available to achieve the necessary operating force and speed 

Technical Data

  • Nominal Diameter : DN 40 to DN 150
  • Nominal Pressure : PN 16 to PN 100
  • Body Material : GP-240-GH 
  • Connection : Flangeacc.toEN 1092 withfacingacc. to DIN2526 formC(FL)Flanges with groove acc. to EN 1092(FLN)(see data sheet 5000-7080) 
  • Seat leakage : acc. DIN EN 1349, Class IV metallic tight (<0,01% Kvs), Class IV-S1metallic lapped in (<0,005% Kvs)

Type

RTK Control Valve MV5351 PN 16 to PN 100 DN 40 to DN 150

Fitur

-