Pennant Thermodynamic Steam Traps PT 11

Indotama Niaga Teknik as pennant distributor in indonesia offer various type of pennant steam traps like Pennant Thermodynamic Steam Traps PT 11 to meet the need industrial and manufacture steam equipment steam trap
Brand :

Pennant

Category :

Steam Equipment

Share :

Distributor Pennant Thermodynamic Steam Traps PT 11

Pennant Thermodynamic Steam Traps PT 11

DESCRIPTION:

Thermodynamic steam trap with inbuilt strainer, in full stainless steel construction, best suited for header and main line drains and drip legs

INSTALLATION:

The trap will operate in any position but the preferred installation is in a horizontal position with the disc cap on the top. Full port isolating valves should be installed upstream and downstream of the trap.

CONNECTIONS:

  • Screwed (NPT/BSPT/BSP)
  • Flanged*, Socket Weld
  • *End connection flanges of ASTM A105 forged carbon steel are welded on

Limiting Conditions:

  • PMA : 600psig
  • TMA : 800 ºF 
  • Maximum operating back pressure at the outlet should not exceed 80% of the inlet pressure.
  • Min. Pressure : 3.5 psi
  • Cold hydro test pressure : 900 psig

Material:

  • Body : ASTM A743 Gr CA 40(Cast Equiv. AISI 420) 
  • Disc Cap : ASTM A743 Gr CA 40(Cast Equiv. AISI 420) 
  • STRAINER CAP : ASTM A743 Gr CA 40(Cast Equiv. AISI 420) 

 

Type

Pennant Thermodynamic Steam Traps PT 11

Fitur

Complete   stainless   steel   construction   ensures   better   mechanical  and  corrosion  resistance  properties.  The  disc  and  seat  are  hardened  by  a  special  induction  hardening  process with seat harder than disc, to withstand continuous, prolonged operation.
Condensate entry below the disc, concentric to the disc/seat ensures a clean and parallel lift of the disc with reference to the seat, eliminating localized wear and tear.
The inbuilt strainer screen is of adequately large area.Ideal for fluctuating loads and pressures.Perfect shut-off, no steam loss