Apperflux 101 gas pressure regulator

indotama niaga teknik as distributor gas pressure regulator in indonesia offer product from brand pietro fiorentini namely Apperflux 101 gas pressure regulator, to meet the need industrial and manufacture
Brand :

Pietro Fiorentini

Category :

Gas Equipment

Share :

Distributor Apperflux 101 gas pressure regulator

Apperflux 101 gas pressure regulator

The scope of this manual is to provide the essential information for the installation, commissioning, disassembly, re-assembly and maintenance of APERFLUX 101 regulators. It is also appropriate to provide a brief illustration of the main features of the regulator and of its accessories.

Main features

The APERFLUX 101 pressure regulator is a regulator for medium and high pressure. The APERFLUX 101 is a “fail open” type regulator and therefore opens in the event of: - rupture of the main diaphragm - no feed in the pilot circuit The main specifications of this regulator are:

  • Design pressure: up to 85 bar (1232,8 Psi)
  • Working temperature range: -20°C + 60 °C (-4 to + 140 °F)
  • Ambient temperature: -20°C + 60 °C (-4 to + 140 °F)
  • Inlet pressure range bpu: 1,8 to 85 bar (26,1 to 1232,8 Psi)
  • Regulating range possible Wd: 0,8 ÷ 74 bar (11,6 to 1073,3 Psig) (depending on the pilot installed)
  • Minimum differential pressure 1 bar (14,5 Psig). Recommended >2 bar (29 Psig)
  • Precision class AC: up to 1 (depending on the operative conditions)
  • Closing pressure class SG 10 (depending on the operative conditions) 

Pilot Operated

Pressure Regulators APERFLUX 101 use following type of pilots:

  • 302/. setting range Wd: from 0,8 to 9,5 bar; (11,6 to 137,7 psig)
  • 304/. setting range Wd: from 7 to 43 bar; (101,5 to 623,5 psig)
  • 305/. setting range Wd: from 20 to 60 bar; (290 to 870,2 psig)
  • 307/. setting range Wd: from 41 to 74 bar; (594,6 to 1073,3 psig)

Type

Apperflux 101 gas pressure regulator pilot operated

Fitur

Accuracy class: up to 1
Available size DN: 2″, 3″, 4″
Closing pressure class SG: up to 2.5
Design pressure: up to 85 bar
Design temperature: from -10 °C to +60 °C (higher or lower temperatures on demand)
Flanging: class 300 and 600 RF or RTJ according to ASME B16.5
Minimum working differential pressure: 1 bar, recommended > 2 bar
Outlet pressure range of Wd: from 0.8 to 74 bar
Range of inlet pressure bpu: from 1.8 to 85 bar