The history of Pietro Fiorentini represents an Italian success story about a company that was able to conquer the world. After all, for those of us whose mission it is to overcome any and all barriers and achieve objectives that seem impossible, expansion is a natural instinct. This has been the case since 1940, when the company was established, with constant growth that today makes us a Group with over 2,000 employees spread across more than 30 international locations, with a strategic commercial presence in more than 100 countries worldwide.
Tags :
DIVAL 600G MP Dival 600 Series , Staflux 185 High Medium Pressure Gas Regulator , asx 176 high medium gas pressure regulator , Apperflux 851 gas pressure regulator , Apperflux 101 gas pressure regulator , Dival 500 Gas Pressure Regulator , Dival 160 AP Gas Pressure Regulator ,
DIVAL 600G MP Dival 600 Series
Dival 600 series pressure regulators are direct acting devices for low and medium pressure applications controlled by a diaphragm and counter spring. These regulators are suitable for use with previously filtered, non corrosive gases.
Type
DIVAL 600G MP Dival 600 Series
Fitur
Design pressure PS: up to 290 Psig (20 bar) Design temperature: -4 °F to + 140 °F (-20 °C to +60 °C) Ambient temperature: -4 °F to + 140 °F (-20 °C to +60 °C) Max inlet pressure Pu: 290 Psig (20 bar) Accuracy class AC: up to 5 Lock-up pressure class SG: up to 10 Available size DN: 1” (25) - 1”1/2 (40) - 2” (50) Flanging: class PN 16/25 according to ISO 7005-1, ISO 7005-2, class ANSI 150RF according to ANSI B16.5, ASME B16.42 and class ANSI 125 FF according to ASME B16.1 Threaded connections: DN 2” Rp ISO 7-1 or DN 2”NPTF ASME B1.20.1 (only ductile iron)
Staflux 185 High Medium Pressure Gas Regulator
PT Indotana Niaga Teknik as distributor Gas Pressure regulator in indonesia offer product from brand pietro fiorentini , that is Staflux 185 High Medium Pressure Gas Regulator. To meet the need industrial and manufacture
Type
Staflux 185 High Medium Pressure Gas Regulator
Fitur
Accuracy class: up to 5 Available size DN: 1″, 2″, 3″ Closing pressure class SG: up to 10 Design pressure: up to 100 bar Design temperature: from -15 °C to +60 °C Flanging: class 300 and 600 RF or RTJ according to ASME B16.5 Outlet pressure range of Wd: from 1 to 75 bar Range of inlet pressure bpu: from 2 to 85 bar
asx 176 high medium gas pressure regulator
As distributor gas pressure regulator in indonesia, PT Indotama Niaga Teknik offer product from brand pietro fiorentini that is , asx 176 high medium gas pressure regulator. To meet the need industrial and manufacture
Type
Asx 176 High Medium Gas Pressure Regulator
Fitur
Accuracy class: up to 1 Available size DN: 1″, 2″, 3″, 4″, 6″ Closing pressure class SG: up to 2.5 Design pressure: up to 102 bar Design temperature: from -20 °C to +60 °C Flanging: class 300, 600 RF or RTJ according to ASME B16.5 Minimum working differential pressure: 0.5 bar Outlet pressure range of Wd: from 0.3 to 74 bar, depending on the installed pilot Range of inlet pressure bpu: from 0.8 to 100 bar
Apperflux 851 gas pressure regulator
PT indotama niaga teknik as distributor gas pressure regulator in indonesia offer product from brand pietro fiorentini namely Apperflux 851 gas pressure regulator, to meet the need industrial and manufacture
Type
Apperflux 851 gas pressure regulator
Fitur
Accuracy class: up to 5 Available size DN: 1″, 2″, 3″, 4″, 6″, 8″, 10″ Closing pressure class SG: up to 5 Design pressure: up to 102 bar Design temperature: from -20 °C to +60 °C (higher or lower temperatures on demand) Flanging: class 150, 300, 600 RF or RTJ according to ASME B16.5 or PN 16, 25, 40 according to ISO 7005 Minimum working differential pressure: 0.5 bar, recommended > 2 bar Outlet pressure range of Wd: from 0.8 to 74 bar, depending on the installed pilot Range of inlet pressure bpu: from 1.3 to 85 bar Where can you use it:
Apperflux 101 gas pressure regulator
indotama niaga teknik as distributor gas pressure regulator in indonesia offer product from brand pietro fiorentini namely Apperflux 101 gas pressure regulator, to meet the need industrial and manufacture
Type
Apperflux 101 gas pressure regulator pilot operated
Fitur
Accuracy class: up to 1 Available size DN: 2″, 3″, 4″ Closing pressure class SG: up to 2.5 Design pressure: up to 85 bar Design temperature: from -10 °C to +60 °C (higher or lower temperatures on demand) Flanging: class 300 and 600 RF or RTJ according to ASME B16.5 Minimum working differential pressure: 1 bar, recommended > 2 bar Outlet pressure range of Wd: from 0.8 to 74 bar Range of inlet pressure bpu: from 1.8 to 85 bar
Dival 500 Gas Pressure Regulator
PT Indotama Niaga Teknik distributor pietro fiorentini in indonesia offer product namely Dival 500 Gas Pressure Regulator, to meet the need industrial and manufactur gas pressure regulator
Type
Dival 500 Gas Pressure Regulator
Fitur
Accuracy class: up to 10 Available size DN: 1″ x 1″, 1″ x 1″ 1/2 Closing pressure class SG: up to 10 Design pressure: up to 10 bar for BP, up to 20 bar for MP and TR Design temperature: from -20 °C to +60 °C Minimum working differential pressure: 0.1 bar Outlet pressure range of Wd: from 13 to 100 mbar for BP, from 100 to 300 mbar for MP, from 300 to 2500 mbar for TR Range of inlet pressure bpu: from 0.5 to 10 bar for BP, from 0.5 to 20 bar for MP and TR
Dival 160 AP Gas Pressure Regulator
As Distributor pietro fiorentini in indonesia. PT Indotama Teknik offer product namely Dival 160 AP Gas Pressure Regulator to meet the need industrial and manufacture
Type
Dival 160 AP Gas Pressure Regulator
Fitur
Accuracy class: up to 5 Available size DN: 1″ Closing pressure class SG: up to 10 Design pressure: 85 bar Design temperature: from -10 °C to +60 °C Flanging: class 300 and 600 RF or RTJ according to ASME B16.5 Outlet pressure range of Wd: from 0.85 to 4.5 bar Range of inlet pressure bpu: from 1.4 to 85 bar
